Examples



mdbootstrap.com



 
Статья
2022

Successive Modification of Montmorillonite with Quaternary Alkylammonium Salts of Various Structures as a Method of Preparing Nanofillers for in situ Synthesis of Polymer Nanocomposites


V. A. GerasinV. A. Gerasin, I. M. PogodinI. M. Pogodin, V. V. KurenkovV. V. Kurenkov, D. I. MendeleevD. I. Mendeleev
Российский журнал прикладной химии
https://doi.org/10.1134/S1070427222010086
Abstract / Full Text

In accordance with the suggested procedure, the strength characteristics of polymers prepared by radical polymerization of vinyl polymers are enhanced by grafting the monomers to the nanofiller surface. When preparing high-strength polymer–aluminosilicate nanocomposites by radical polymerization in situ, it is appropriate to ensure both grafting of polymer chains to the aluminosilicate surface of the filler (montmorillonite) and hydrophobization of the nanofiller surface. To solve this problem, successive modification of montmorillonite with two quaternary ammonium salts with different properties was studied. Fillers with mixed modifiers were prepared, and their structure was determined. Studies of composites with such fillers confirmed the appropriateness of using the mixture of modifiers for preparing the filler: The nanocomposite based on butyl methacrylate, containing organoclay with the mixed modifier, surpasses in the Young’s modulus both unfilled poly(butyl methacrylate) and composites containing nanoclays with the individual modifiers.

Author information
  • Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences, 119991, Moscow, RussiaV. A. Gerasin, I. M. Pogodin, V. V. Kurenkov & D. I. Mendeleev
  • Mendeleev University of Chemical Technology of Russia, 125047, Moscow, RussiaV. A. Gerasin & I. M. Pogodin
References
  1. Alexander, M. and Dubois, P., Mater. Sci. Eng., 2020, vol. 28, pp. 1–63. https://doi.org/10.1016/S0927-796X(00)00012-7
  2. Omanović-Mikličanin, E., Badnjević, A., Kazlagić, A., and Hajlovac, M., Health Technol., 2019, vol. 10, pp. 51–59. https://doi.org/10.1007/s12553-019-00380-x
  3. Sanusi, O.M., Benelfellah, A., and Aït Hocine, N., Appl. Clay Sci., 2020, vol. 185, ID 105408. https://doi.org/10.1016/j.clay.2019.105408
  4. Mukhopadhyay, R., Bhaduri, D., Sarkar, B., Rusmin, R., Hou, D., Khanam, R., and Ok, Y.S., J. Hazard. Mater., 2020, vol. 383, ID 121125. https://doi.org/10.1016/j.jhazmat.2019.121125
  5. Burgentzlé, D., Duchet, J., Gérard, J.F., Jupin, A., and Fillon, B., J. Colloid Interface Sci., 2004, vol. 278, no. 1, pp. 26–39. https://doi.org/10.1016/j.jcis.2004.05.015
  6. Wang, W., Zhao, Y., Yi, H., Chen, T., Kang, S., Li, H., and Song, S., Nanotechnology, 2018, vol. 29, ID 025605. https://doi.org/10.1088/1361-6528/aa9ba4
  7. Dhatarwal, P., Sengwa, R.J., and Choudhary, S., Compos. Commun., 2017, vol. 5, pp. 1–7. https://doi.org/10.1016/j.coco.2017.05.001
  8. Ji, J., Ke, Y., Pei, Y., and Zhang, G., J. Appl. Polym. Sci., 2017, vol. 134, ID 44894. https://doi.org/10.1002/app.44894
  9. Khar’kova, E.M., Mendeleev, D.I., Korolev, Yu.M., Shklyaruk, B.F., Gerasin, V.A., and Antipov, E.M., Polym. Sci., Ser. A, 2013, vol. 55, pp. 493–502. https://doi.org/10.1134/S0965545X1307002X 
  10. Akelah, A. and Moet, A., J. Mater. Sci., 1996, vol. 31, pp. 3589–3596. https://doi.org/10.1007/BF00360767
  11. Viville, P., Lazzaroni, R., Pollet, E., Alexandre, M., and Dubois, P., J. Am. Chem. Soc., 2004, vol. 126, pp. 9007–9012. https://doi.org/10.1021/ja048657y
  12. Goulding, K.W.T. and Talibudeen, O., J. Colloid Interface Sci., 1980, vol. 78, pp. 15–24. https://doi.org/10.1016/0021-9797(80)90490-7
  13. Verburg, K., Clays Clay Miner., 1994, vol. 42, pp. 207–220. https://doi.org/10.1346/CCMN.1994.0420211
  14. Lee, S.Y., Cho, W.J., Kim, K.J., Ahn, J.H., and Lee, M., J. Colloid Interface Sci., 2005, vol. 284, pp. 667–673. https://doi.org/10.1016/j.jcis.2004.10.070
  15. Connolly, J., Van Duijneveldt, J.S., Klein, S., Pizzey, C., and Richardson, R.M., Langmuir, 2006, vol. 22, pp. 6531–6538. https://doi.org/10.1021/la0609219
  16. Patlewicz, G.Y., Rodford, R.A., Ellis, G., and Barratt, M.D., Toxicol. Vitr., 2000, vol. 14, pp. 79–84. https://doi.org/10.1016/S0887-2333(99)00086-7
  17. Yeşilyurt, Z., Boylu, F., Çinku, K., Esenli, F., and Çelik, M.S., Appl. Clay Sci., 2014, vol. 95, pp. 176–181. https://doi.org/10.1016/j.clay.2014.04.008
  18. Gerasin, V.A., Bakhov, F.N., Merekalova, N.D., Korolev, Y.M., Fischer, H.R., and Antipov, E.M., Polym. Sci., Ser. A, 2005, vol. 47, no. 9, pp. 954–967.
  19. Assem, Y., Khalaf, A.I., Rabia, A.M., Yehia, A.A., and Zidan, T.A., Polym. Bull., 2017, vol. 74, pp. 3015–3026. https://doi.org/10.1007/s00289-016-1873-2