Synthesis and Properties of Composites of Nanocrystalline Cellulose with Poly(ethylene terephthalate)
A. G. Zakharov, M. I. Voronova, O. V. Surov, N. V. Rubleva, A. V. Afineezskii
Российский журнал прикладной химии
https://doi.org/10.1134/S1070427221020099
A procedure was developed for preparing composites of nanocrystalline cellulose (NCC) with poly(ethylene terephthalate) (PET). Poly(ethylene terephthalate) and PET/NCC composites were prepared by a continuous procedure in two steps: esterification of terephthalic acid with ethylene glycol and polycondensation. The morphological, thermal, sorption, and mechanical properties of the synthesized PET/NCC composites were studied using a set of modern physicochemical methods. Introduction of a small amount of nanocrystalline cellulose (about 0.1%) in the course of poly(ethylene terephthalate) synthesis does not lead to changes in the molecular mass composition of the polymer but appreciably increases the degree of crystallinity and improves the mechanical properties of the composite.
- Krestov Institute of Solution Chemistry, Russian Academy of Sciences, 153045, Ivanovo, RussiaA. G. Zakharov, M. I. Voronova, O. V. Surov & N. V. Rubleva
- Ivanovo State University of Chemical Technology, 153000, Ivanovo, RussiaA. V. Afineezskii
- Habibi, Y., Lucia, L.A., and Rojas, O.J., Chem. Rev., 2010, vol. 110, no. 6, pp. 3479–3500. https://doi.org/10.1021/cr900339w
- Kargarzadeh, H., Mariano, M., Huang, J., Lin, N., Ahmad, I., Dufresne, A., and Thomas, S., Polymer, 2017, vol. 132, pp. 368–393. https://doi.org/10.1016/j.polymer.2017.09.043
- Surov, O.V., Voronova, M.I., and Zakharov, A.G., Russ. Chem. Rev., 2017, vol. 86, no. 10, pp. 907–933. https://doi.org/10.1070/RCR4745
- Chakrabarty, A. and Teramoto, Y., Polymers-Basel, 2018, vol. 10, no. 5, pp. 517–564. https://doi.org/10.3390/polym10050517
- Zaman, M., Liu, H., Xiao, H., Chibante, F., and Ni, Y., Carbohydr. Polym., 2013, vol. 91, no. 2, pp. 560–567. https://doi.org/10.1016/j.carbpol.2012.08.070
- Li, D.W. and Ding, E.Y., J. Appl. Polym. Sci., 2007, vol. 105, no. 2, pp. 373–378. https://doi.org/10.1002/app.26098
- Zhang, H., Wang, X., and Liang, Y., Heliyon, 2015, vol. 1, no. 2, ID e00032. https://doi.org/10.1016/j.heliyon.2015.e00032
- Lei, W., Fang, C., Zhou, X., Yin, Q., Pan, S., Yang, R., Liu, D., and Ouyang, Y., Carbohydr. Polym., 2018, vol. 181, pp. 376–385. https://doi.org/10.1016/j.carbpol.2017.10.059
- Zakharov, A.G., Voronova, M.I., Surov, O.V., Rubleva, N.V., and Afineevskii, A.V., Fibre Chem., 2018, vol. 50, no. 4, pp. 288–292. https://doi.org/10.1007/s10692-019-09977-4
- Wellen, R.M.R., Mater. Res., 2014, vol. 17, no. 6, pp. 1620–1627. https://doi.org/10.1590/1516-1439.302614
- Kang, D.H., Auras, R., Vorst, K., and Singh, J., Polym. Test., 2011, vol. 30, pp. 60–68. https://doi.org/10.1016/j.polymertesting.2010.10.010
- Dieval, F., Khoffi, F., Mir, R., Chaouch, W., Nouen, D.L., Chakfe, N., and Durand, B., Int. J. Polym. Sci., 2012, ID 646578. https://doi.org/10.1155/2012/646578
- Brooks, D.W. and Giles, G.A., PET Packaging Technology, London: Sheffield Academic, 2002.
- Kudashev, S.V., Rakhimova, N.A., Zheltobryukhov, V.F., Urmantsev, U.R., and Selezneva, G.V., Russ. J. Appl. Chem., 2012, vol. 85, no. 11, pp. 1764–1770. https://doi.org/10.1134/S1070427212100225
- Kudashev, S.V., Urmantsev, U.R., Tabaev, B.V., Arisova, V.N., Danilenko, T.I., and Zheltobryukhov, V.F., Izv. Volgogradsk. Gos. Tekh. Univ., 2013, vol. 19, no. 122, pp. 86–90.
- Boiko, Yu.M., Marikhin, V.A., Myasnikova, L.P., and Stråhl, K., Polym. Sci., Ser. A+, 2007, vol. 49, no. 6, pp. 651–662. https://doi.org/10.1134/S0965545X07060053
- Daubeny, R. de P., Bunn, C.W., and Brown, C.J., Proc. Roy. Soc. London A, 1954, vol. 226, pp. 531–542. https://doi.org/10.1098/rspa.1954.0273
- Fu, Y., Busing, W.R., Jin, Y., Affholter, K.A., and Wunderlich, B., Macromolecules, 1993, vol. 26, no. 9, pp. 2187–2193. https://doi.org/10.1021/ma00061a007