Examples



mdbootstrap.com



 
Статья
2017

Dislocation Substructures Formed After Fracture of Deformed Polycrystalline Cu–Al Alloys


N. A. KonevaN. A. Koneva, L. I. TrishkinaL. I. Trishkina, T. V. CherkasovaT. V. Cherkasova
Российский физический журнал
https://doi.org/10.1007/s11182-017-1110-y
Abstract / Full Text

The paper deals with the dislocation substructure of polycrystalline FCC alloys modified by plastic deformation at a distance from the area of the specimen fracture. Observations are performed using the transmission electron microscopy. Cu–Al alloys with grain size ranging from 10 to 240 μm are studied in this paper. The parameters of the dislocation substructure are measured and their variation is determined by the increasing distance from the fracture area. It is shown how the grain size influences these processes. The different dislocation substructures which determine the specimen fracture at a mesocscale level are found herein.

Author information
  • Tomsk State University of Architecture and Building, Tomsk, RussiaN. A. Koneva, L. I. Trishkina & T. V. Cherkasova
References
  1. V. V. Rybin, Large-Scale plastic Deformations and Fracture of Metals [in Russian]. Metallurgiya, Moscow (1986).
  2. V. I. Trefilov, V. F. Moiseev, E. P. Pechkovskii, et al. Deformation Hardening and Fracture of Polycrystalline Materials [in Russian]. Naukova dumka, Kiev (1989).
  3. N. A. Koneva, D. V. Lychagin, L. A. Teplyakova, and É. V. Kozlov, Theoretical and Experimental Research of Disclinations [in Russian]. Ioffe Physical-Technical Institute of the Russian Academy of Sciences, Leningrad (1986), pp. 116–126.
  4. N. A. Koneva and É. V. Kozlov, Structural Levels of Plastic Deformation and Fracture [in Russian]. Nauka, Novosibirsk (1990), pp. 123–186.
  5. É. V. Kozlov, N. A. Koneva, and L. I. Trishkina, Dislocation and Rotational Deformation of Solids [in Russian]. Ioffe Physical-Technical Institute of the Russian Academy of Sciences, Leningrad (1990), pp. 89–125.
  6. N. A. Koneva, É. V. Kozlov, and L. I. Trishkina, Metallofizika, 13, No. 10, 49– 58 (1991).
  7. S. A. Saltykov, Stereometric Metallography [in Russian]. Metallurgiya, Moscow (1970).
  8. N. A. Koneva, L. I. Trishkina, D. V. Lychagin, and É. V. Kozlov, New Methods in Physics and Mechanics of Deformable Solids [in Russian]. Pt. 1, E. Panin, ed., TSU, Tomsk (1990), pp. 83–93.
  9. N. A. Koneva, L. I. Trishkina, T. V. Cherkasova, and É. V. Kozlov, Vestnik Tambovskogo universiteta. Ser. Estestvennye i Tekhnicheskie Nauki, 21, No. 3, 726–729 (2016).
  10. É. V. Kozlov, D. V. Lychagin N. A. Koneva, and L. I. Trishkina, Strength Physics of Heterogeneous Materials [in Russian]. A. Romanov, ed., Ioffe Physical-Technical Institute of the Russian Academy of Sciences, Leningrad (1988), pp. 3–13.
  11. A. Howie and P. R. Swaon, Phil. Mag., No. 6, 1215–1226 (1961).
  12. N. A. Koneva, É. V. Kozlov, L. I. Trishkina, and T. V. Cherkasova, FPSM, 13, No. 2, 162–167 (2016).
  13. V. E. Panin, A. V. Panin, T. F. Elsukova, and Yu. F. Popkova, Phys. Mesomech., 17, No. 6, 7–18 (2014).
  14. V. E. Panin, V. E. Egorushkin, A. V. Panin, and A. G. Chernyavskii, Phys. Mesomech., 19, No. 1, 31–46 (2016).