Examples



mdbootstrap.com



 
Статья
2020

Modification of Mineral Powder by Various Organic Materials: Their Potential as Reinforcement for Unsaturated Polyester Composites


Ahmad MousaAhmad Mousa, Michaela Gedan-SmolkaMichaela Gedan-Smolka
Российский журнал прикладной химии
https://doi.org/10.1134/S1070427220120216
Abstract / Full Text

Industrial by product dumped from iron making industry (slag) has been modified by various chemical agents, particularly, paraffin wax, liquid nitrile butadiene rubber (NBR) and silane coating agent. The modified slag powder samples were characterized by differential scanning calorimeter (DSC), thermogravimetric analysis (TGA) and the corresponding differential thermal gravimetric (DTG). As further evidence on the effectiveness of the modification process, the modified slag samples were subjected to attenuated total reflectance infrared spectroscopy (ATR-IR). The potential of the modified slag as reinforcement for unsaturated polyester (UPE) composites were studied. The mechanical and dynamic mechanical properties of the fabricated composites were inspected as a function of modification type.

Author information
  • Department of Materials Engineering, Faculty of Engineering, Al Balqa Applied University, 19117, Salt, JordanAhmad Mousa
  • Leibniz-Institut für Polymerforschung Dresden e. V., Hohe Strasse 6, D-01069, Dresden, GermanyMichaela Gedan-Smolka
References
  1. Rungruang, P., Grady, B.P., and Supaphol, P., Colloids Surf. A, 2006, vol. 275, p. 114. https://doi.org/10.1016/j.colsurfa.2005.09.029
  2. Keler, D.S. and Luner, P., Colloids Surf. A, 2011, vol. 161, p. 401. https://doi.org/10.1016/S0927-7757(99)00212-5
  3. Papirer, E., Schultz, J., and Turchi, C., Eur. Polym. J., 1984, vol. 20, p. 1155. https://doi.org/10.1016/0014-3057(84)90181-2
  4. Osman, M.A. and Suter, U.W., Chem. Mater., 2002, vol. 14, p. 4408. https://doi.org/10.1021/cm021222u
  5. Zhang, Y., Liu, Q., Zhang, Q., and Lu, Y., Appl. Clay Sci., 2010, vol. 50, pp. 255–259.
  6. Mihajlović Slavica, R., Daković Aleksandra, S., Sekulić Živko, T., and Ileš Deana, A., Hemijska Industrija, 2009, vol. 63, pp. 101–106.
  7. Matteucci, S., Raharjo, R.D., Kusuma, V.A., Swinnea, J.S., and Freeman, B.D., Macromolecules, 2008, vol. 41, no. 6, pp. 2144–2156. https://doi.org/10.1021/ma702459k
  8. Kovačević, V., Lučić, S., and Cerovečki, Ž., J. Adhesion and Adhesives, 2011, vol. 17 , pp. 239–245.
  9. Robaidi, A., Anagreh, N., Massadeh, S., and Mousa, A., J. Adhesion Sci. & Techn., vol. 25, pp. 1725–1746. https://doi.org/10.1163/016942410X535046
  10. Karger-Kocsis, J., Gremmels, J., Mousa, A., Ishiaku, Us, and Ishak, Zam, KGK Kautschuk Gummi Kunststoffe, 2000, vol. 53 , pp. 528–533. https://doi.org/10.1016/S0022-3093(00)00145-9
  11. Fredericci, C., Zanotto, E., and Ziemath, E., J. Non-Crystalline Solids, 2000, vol. 273, pp. 64–75.
  12. Lemić, J., Tomašević-Čanović, M., Duričić, M., and Stanić, T., J. Colloid Interface Sci., 2005, vol. 292, p. 11. https://doi.org/10.1016/j.jcis.2005.05.080
  13. Yasipourtehrani, S., Master Thesis “Investigation of Thermal Properties of Blast Furnace Slag to Improve Process Energy Efficiency,” Macquraie University, 2016, pp. 10–19.
  14. Mousa, A., Wagenknecht, U., Gedan-Smolka, M., and Schneider, A., J. Sust. Metall., 2019, vol. 5, no. 3, pp. 442–448. https://doi.org/10.1007/s40831-019-00234-w
  15. Zhang, B., Tian, Y., Jin, X., Lo, T., Cui H, Materials (Basel), 2018, vol. 11, 2205. https://doi.org/10.3390/ma11112205
  16. Mousa, A., Gedan‐Smolka, M., Wagenknecht, U., J. Vinyl and Additive Technology, 2020, vol. 26, no. 2, pp. 173–179. https://doi.org/10.1002/vnl.21730
  17. Mousa, A., Wagenknecht, U., and Gedan‐Smolka, M., Waste and Biomass Valorization, 2020, vol. 11, no. 8, p. 4379. https://doi.org/10.1007/s12649-019-00741-7
  18. Mousa, A., Gedan-Smolka, M., Wagenknecht, U., and Massadeh, S., J. Adhesion Sci. & Techn., 2020, vol. 34, no. 14, pp. 1609–1627. https://doi.org/10.1080/01694243.2020.1714850
  19. Ishiaku, U.S., Mohd Ishak, Z.A., Ismail, H., and Nasir, M., Polymer Int., 1996, vol. 41, no. 3, pp. 327–336. https://doi.org/10.1002/(SICI)1097-0126(199611)41:3<327::AID-PI618>3.0.CO;2-3
  20. Mikhailovsky, S.V., Chernov, A.S., Mironova, E.Yu., Ermilova, M.M., Orekhova, N.V., and Malygin, A.A., Russ. J. Appl. Chem., 2014, vol. 87, pp. 26–34. https://doi.org/10.1134/S1070427214010030
  21. Mihajlović, S., Sekulić, Ž, Daković, A., Vučinić, D., Jovanović, V., and Stojanović, J., Ceramics–Silikáty, 2009, vol. 53, pp. 268–275.
  22. Gilbert, M., Petiraksakul, P., and Mathieson, I., Materials Sci. & Techn., 2011, vol. 17, no. 11, pp. 1472–1478. https://doi.org/10.1179/026708301101509494
  23. Minowa, M., Int Polymer Sci. & Technol., 2003, vol. 30, pp. 9–14. https://doi.org/10.1177/0307174X0303000802
  24. Qixia, Liu, Huiping, Zhang, and Xiong, Yan, Iranian Polymer J., 2019, vol. 18, no. 5, pp. 401–413.
  25. Wei, W., Zhang, Y., Liu, M., Zhang, Y., Yin, Y., Gutowski, W.-S., Deng, P., and Zheng, C., Polymers, 2019, vol. 11, p. 647. https://doi.org/10.3390/polym11040647