Examples

mdbootstrap.com



Российский журнал прикладной химии

№
стр.
1
Erratum to: Successive Modification of Montmorillonite with Quaternary Alkylammonium Salts of Various Structures as a Method of Preparing Nanofillers for in situ Synthesis of Polymer Nanocomposites (SILAR)-Deposited CuO Thin Films of Nitrobenzene
0
2
Erratum to: Atomic Layer Deposition of Ni–Mn–O Coatings Using Precursors Equivalent
0
3
Decomposition of Carbon Dioxide in Microwave Discharges (an Analytical Review)
1
4
Synthesis and Properties of TiO2–SiO2/CaO Biomaterials with Spherical Particles Based on Tokem-200 Cation Exchange Resin
21
5
Application of Rare Earth 1,3-Diketonate Derivatives as Radioluminophores
28
6
Investigation of the Structure of Cyclodextrin Nitrates by the X-Ray Diffraction Method
32
7
Development of Yttrium and Iron Oxide Thin Films via AACVD Method for Photooxidation of Water
37
8
Conditions of Formation of Stable Polyelectrolyte Complexes Based on N-Succinyl Chitosan and Poly-N,N-diallyl-N,N-dimethylammonium Chloride
46
9
New Epoxy Resin Polymerization Catalysts Based on N,N-Dimethylaminoalkylamides of Perfluoroalkanoic Acids
53
10
Successive Modification of Montmorillonite with Quaternary Alkylammonium Salts of Various Structures as a Method of Preparing Nanofillers for in situ Synthesis of Polymer Nanocomposites
59
11
Antifouling Properties of Biocide-Containing Systems Incorporated into Thermally Expanded Graphite
70
12
Epoxy Nanocomposites Modified with Functionalized Multiwalled Carbon Nanotubes
76
13
Preparation of Nanosized Particles of Cobalt in the Presence of Water-Soluble Polymers
84
14
Phase Transformations and Formation of Nanofibers under the Action of a Nanosecond Relativistic Electron Beam on Syntactic Foams with a Polymeric Siloxane Binder
88
15
Composite Fibers Based on Hydrated Cellulose and Poly-N-vinylpyrrolidone, Prepared from Cellulose Solutions in N-Methylmorpholine-N-Oxide
100
16
Properties of Zinc Oxide Adsorbent for Adsorbing Hydrogen Sulfide
113
17
Photocatalytic Activity of Fluorinated Titanium Dioxide in Ozone Decomposition
118
18
Effect of Support on Catalytic Properties of Platinum-Containing Catalysts in Hydrogenation of a Biphenyl–Diphenylmethane Eutectic Mixture
126
19
Cytotoxicity and Gene Expression Studies of Curcumin and Piperine Loaded Nanoparticles on Breast Cancer Cells
135
20
Extraction and Separation of Co2+ from Ni2+ Using the Novel Task-Specific Ionic Liquids of [C4H9NH3][P507]
143
21
A Mini-Review on Methods of Solvent Extraction Kinetics for Heavy Metal Ions
155
22
Epoxy Nanocomposites with Metal-Containing Fillers: Synthesis, Structure, and Properties
167
23
Pyrolysis of Polyurethanes. Process Features and Composition of Reaction Products
191
24
One-Step Synthesis of a Steel Corrosion Inhibitor, 1-(2-Neononylamidoethyl)-2-neononyl-2-imidazoline
256
25
Deposition of PbS Films by Pyrolysis of Atomized Solutions of Lead Thiourea Complexes
264
26
Modeling of Degassing of Viscoplastic Liquids in a Cylindrical Hydrocyclone
270
27
Synthesis and Antimicrobial Activity of 3-Substituted 8-Propenylbenzo[e][1,3]oxazines
277
28
Sodium Tetraborate as a Triglyceride Transesterification Catalyst
284
29
Product of the Reaction of Activated Industrial Aluminum Alloys with Water as a Precursor of a Catalyst Support
288
30
A Highly Selective Cr2O3/nano-ZSM-5 Bifunctional Catalysts for CO2 Hydrogenation to Aromatics
296
31
Prospects for Using Hydrogen in Various Branches of the World Economy as One of the Directions of Its Decarbonization
309
32
Thermodynamic and Electrochemical Investigations of Potassium–Antimony Alloys
341
33
Use of Equivalent Reactant Feeding in Deposition of Ni–Mn–O Coatings by Molecular Layering
352
34
Anionic Polymerization of Epoxy Resins under the Action of Imidazoles
357
35
Plasma Oxidation of Polypropylene Fibers for Concrete Reinforcement
366
36
Surface Modification of Cellulose Microfibrils with Silane Agent for Eco-Friendly Hydrophobic Coatings
379
37
Thermophysical Properties of the Polymer Composite Polytetrafluoroethylene/CaF2-Oxyfluoride Glass
387
38
Synthesis and Properties of Carbon Gels Based on Larch Bark Tannins and Hydrolysis Lignin
393
39
Chitosan-Modified Calcium Alginate Microspheres for Cefotaxime Immobilization
401
40
Synthesis and Properties of Magnetically Susceptible Porous Carbon Materials Based on Hydrolysis Lignin Modified with ZnCl2 and FeCl3
408
41
Addition Polymerization of Cyclopentadiene in the Presence of Catalytic Systems Based on Pd(0) Complexes and Organic Cocatalysts
417
42
Kinetic Heterogeneity of the Catalytic System Based on Gadolinium Chloride Solvate in 1,4-cis-Polyisoprene Production
423
43
Preparation and Catalytic Performance of Supramolecular Ionic Liquid Catalyst
430
44
A Procedure for Preparing Effective Immunomodulators and Antioxidants: 5-Hydroxy-6-methyluracil and 5-Hydroxy-1,3,6-trimethyluracil
436
45
Enantioselective Bioreduction of 5-Hexen-2-one in Directional Synthesis of Insect Pheromones
442
46
Sorption Selectivity of Palladium(II) by Poly(N-2-Sulfoethylallylamine) under Static and Dynamic Conditions
451
47
Calcium Carbonate Polymorphs in Overbased Oil Additives and Greases
461
48
Interpolymer Complexes and Problem of Polymer Waste Management
472
49
Application of Nanofibers in Virus and Bacteria Filtration
486
50
Relaxation Times of Chemical Reactions with Arbitrary Kinetics
499
51
Production of Carbon Dioxide Hydrates Using Frozen Aqueous Solutions of Polyvinyl Alcohol
506
52
Synthesis of Barium Aluminate of Disk-Shaped Morphology Using the Product of Centrifugal Thermal Activation of Gibbsite
512
53
Thermochemical Behavior of Crystalline Copper–Zinc Complexes of Nitrilotris(methylenephosphonic) Acid
519
54
Production of Luminescent Europium(III) Compounds with para-Methoxycinnamic Acid
529
55
Formation and Properties of Nickel Contacts to Thermoelectric Materials Based on Bismuth and Antimony Chalcogenides
536
56
Low-Temperature Atmospheric-Pressure Plasma-Enhanced Chemical Deposition of Silicon Dioxide Films from Tetraethoxysilane
544
57
Highly Heat-Resistant Poly(Amido Hydroxy Amides) with Increased Elongation at Break and Photosensitive Formulations Based on Them
551
58
Sorption Properties of the Manganese(IV) Oxide/Mechanically Activated Graphite Composite with Respect to As(III) Compounds
561
59
Hybrid Materials Based on Carbon Fabric Modified with Transition Metal Oxides and the Possibility of Their Use as Electrode Materials for Supercapacitors
568
60
Preparation of Metal Corrosion Inhibitors from Arylamines and Butadiene
575
61
Study of the Anodic Behavior of the Chromium-Doped Zn55Al Alloy in Corrosive Environments
582
62
Recovery of Nitrogen and Phosphorus in Processing of Aqueous Production Wastes by Precipitation of Struvite Using an Active Intermediate as a Reagent
588
63
Solid–Liquid Extraction of Rare Earth Elements Ce(IV), Pr(III), Er(III), and Y(III) from Concentrated Phosphoric Acid Solutions Using Strongly Acidic Cation Exchange Resin (SQS–6)
602

№
стр.
1
Erratum to: Thermodynamic Simulation for Interaction of Polychlorinated Biphenyls with Potassium Hydroxide in Polyalkanolamines
0
2
Erratum to: Fusibility of Agricultural Plant Waste Ash under the Conditions of High-Temperature Processing
0
3
Erratum to: On the Mechanism of Sulfur Removal during Hydroconversion in the Presence of a Catalyst MoS2
0
4
Erratum to: Photocatalytic Degradation of Antibiotic Norfloxacin Aqueous Solution by Ce/Bi2WO6: Optimization and Simulation of Process by RSM
0
5
Erratum to: Synthesis of Nickel-Containing Sapropel Based Catalysts and Their Study in the Liquid-Phase Hydrogenation of Nitrobenzene
0
6
Erratum to: Effect of Synthesis Parameters on the Structural, Optical and Electrical Properties of Successive Ionic Layer Adsorption and Reaction
0
7
Synthesis of Lithium Sulfide by Carbothermal Reduction of Lithium Sulfate with Petroleum Coke
1
8
High-Temperature Synthesis of Composite Materials Based on MAX Phases in the Cr–Mn–Al–C System
9
9
Preparation and Properties of Metal-Containing Nanocomposites Based on Isotactic Polypropylene and Butadiene–Acrylonitrile Rubber
17
10
Generator of an H2Se–H2 Mixture, Based on Packing with Selenium Reflux. Part 1. Development of the Design and Experimental Study of the Generator
22
11
Optimization of Technology for Synthesis of Li4Ti5O12 Anode Materials for Lithium-Ion Batteries
30
12
Effect of Major Factors on the Composition of Thin Bi2Se3 Films
38
13
Kinetics of Propane Hydrate Formation from Melting Ice in Frozen Aqueous Poly(vinyl alcohol) Solutions
43
14
A Simple Method for Estimating the Solubility Parameter of Small Molecules and Polymeric Materials
51
15
An Effect of the Nature of Components on the Stability of Their Immobilization on the Surface of Porous Membranes Based on Sulphonate-Containing Copolyamide
60
16
Structural Composition of Butadiene–Styrene Copolymers, According to 1Н and 13С NMR Data
68
17
Study of Kinetics of Isoprene Polymerization in the Presence of Neodymium-Containing Catalytic Systems Modified in Turbulent Flows
77
18
Computational and Experimental Method for Evaluating the Reactivity of Substituted Toluene Diamines and Azo Compounds in the Reactions of Amine and Anhydride Curing of Epoxy Resins
84
19
Polymer Materials for Combustion of Discarded Parts of Aerospace Vehicles
94
20
Allyl-Functionalized Polybenzimidazole for Laser Stereolithography
99
21
Fischer–Tropsch Synthesis in the Presence of Catalysts Based on Unmodified Iron Ores
104
22
Hydrogenation of 1,5,9-Cyclododecatriene in a Three-Phase System in the Presence of Nickel Nanoparticles Supported on NаX Zeolite
110
23
Ion Exchange Treatment of Cobalt Acetate Solutions to Remove Iron(III) Impurity
116
24
Comprehensive Analysis of the Liquid Fraction of Car Tire Pyrolysis Products by Gas Chromatography–Mass Spectrometry
122
25
Generator of an H2Se–H2 Mixture, Based on Packing with Selenium Reflux. Part 2. Mathematical Modeling
129
26
An Effect of the Reagent Concentration in the Flow of a Gas Mixture on the Parameters of the Combustion Wave of CaH2 in SiF4
136
27
Sintering Behavior and Properties of Reaction-Bonded Silicon Nitride
143
28
Synthesis of Highly Dispersed Aluminum Magnesium Oxides from the Product of Centrifugal Thermal Activation of Gibbsite
152
29
Synthesis and Photocatalytic Properties of Tin(II) Oxide
162
30
Some Cubane Derivatives as Potential Components of Solid Gas Generator Propellants
172
31
Detection of Alkylhydrazine Impurities in Hydrocarbon Rocket Propellants by Chromatography and Mass Spectrometry
182
32
Silver Nanocomposites Based on Copolymers N,N-Dialyl-Nʹ-acylhydrazines with Acrylic Monomers
192
33
Synthesis and Properties of Composites of Nanocrystalline Cellulose with Poly(ethylene terephthalate)
202
34
Complexes of Polyethylenimine with Copper and Cobalt Ions as Precursors for Preparing Metal Nanoparticles
210
35
Acylation of Resorcinol with Pyromellitic Dianhydride
217
36
Synthesis of Nickel-Containing Sapropel Based Catalysts and Their Study in the Liquid-Phase Hydrogenation of Nitrobenzene
223
37
Synthesis of 5-Substituted 1H-Tetrazoles Catalyzed by M-SAPO-34 (M = Co, Cu, Mn, Fe, and V) Nanostructures
230
38
Effect of CTAB on the Oxidation of Furfural to Maleic Acid over Hierarchical CoAPO-5 Catalysts
237
39
Electrochemical Parameters of LiMn2O4 and Li4Ti5O12 Electrodes with Different Types of Binders at Negative Temperatures
245
40
Evaluation of the Effect of Temperature on the Efficiency of Wastewater Treatment with a Composite Coagulant-Flocculant Based on Nepheline Raw Materials
252
41
Effect of the Counterion in the Introduced Diatomite Ion Exchanger on the Adhesion Durability of Anticorrosive Bitumen–Inorganic Systems
259
42
Preparation and Use of Materials for Color Road Pavement and Marking
265
43
Estimation of the Rate Constants of the Chemical Reaction Stages in a Enclosed Non-Isothermal Gradientless Reactor
284
44
Fluorescent Properties of Polymer Systems with Negative Photochromism Based on Complexes of Spiropyran with Metal Ions
289
45
Silver-Containing Nanodispersions Based on the Water-Soluble Copolymer of N-Vinylpyrrolidone with Sodium N-Crotyl-4-aminosalicylate and Crotyl Alcohol: Synthesis and Spectroscopic, Structural, and Morphological Characteristics
294
46
Use of Metal Oxide–Silica Fillers NiО‒SiO2 and СuO‒SiO2 as Active Modifiers of Polyurethane Composites
303
47
Recovery of Palladium(II) and Platinum(IV) with Heterochain Complexing Sorbents from Solutions Simulating Leaching Solutions of Spent Industrial Catalysts and Spent Refining Solution
310
48
Use of Microwave Radiation for Denitration of Uranyl Nitrate Solution and Subsequent Sintering of Uranium Dioxide Fuel Pellets
317
49
Effect of Chromium Oxide Additions on the Stability of Glass Ceramic Sealants for Solid Oxide Fuel Cells
323
50
Thermodynamic Simulation for Interaction of Polychlorinated Biphenyls with Potassium Hydroxide in Polyalkanolamines
330
51
Study of the Composition of Volatile By-Products, Formed by Dissolution of Wood in Ionic Liquids Based on 1-Butyl-3-Methylimidazolium
337
52
Oxidative Conversion of Wood Gasification Products in a Mixing Reactor
347
53
Fusibility of Agricultural Plant Waste Ash under the Conditions of High-Temperature Processing
354
54
Influence of the Morphology of Mesoporous Carbon on the Electrocatalytic Activity of Pt in Oxygen Reduction
362
55
Electrode for a Supercapacitor Based on Electrochemically Synthesized Multilayer Graphene Oxide
370
56
Tribological Properties of Langmuir–Blogett Composite Coatings of Cerotinic Acid with Boron Nitride
379
57
Perfluorosulfone Membrane Modified with Ni2+ Cations for Visual Control of Air Humidity
385
58
Ratio Design of Docetaxel/Quercetin Co-Loading-to-Nanocarrier: Synthesis of PCL–PEG–PCL Copolymer, Study of Drug Release Kinetic and Growth Inhibition of Human Breast Cancer (MCF-7) Cell Line
388
59
Enhanced Optical and Electrical Properties of Graphene Oxide-Silver Nanoparticles Nanocomposite Film by Thermal Annealing in the Air
402
60
Extraction Methods for Removing Sulfur and Its Compounds from Crude Oil and Petroleum Products
411
61
Effect of Impurities on Varistor Properties of High-Voltage ZnO Ceramics
437
62
Influence of the Hydrothermal Synthesis Conditions on the Photocatalytic Activity of Titanium Dioxide Nanorods
442
63
Thermal Behavior of Mixtures of Zirconium(IV) and Yttrium(III) Dipivaloylmethanates
450
64
Derivatives of Neopentanoic Acid Hydrazide as Reagents for Flotation Recovery of Non-Ferrous Metals
457
65
An Experimental Study of the Melt Immiscibility and Distribution of Rare Earth Elements, Р2О5, and Nb2O5 between Immiscible Melts in the Monazite–SiO2–NaF–Nb2O5 System
468
66
Influence of the Structure of the Aminoalkyl Group in Polysiloxane on the Selectivity of Its Interaction with Metal Ions
478
67
Production of Magnetic Carbon Materials during Decomposition of Iron Salts Deposited on a Porous Carbon Matrix
486
68
Evolution of the Structure of Aluminosilicate Particles in the Course of Formation of Nanocomposite Coatings Based on Alkyd Oligomers
491
69
Selective Treatment of Light Catalytic Cracking Gasoil with N-Methylpyrrolidone to Obtain a High-Density Jet Fuel Component or a Liquid Organic Hydrogen Carrier
501
70
Comparison of Various Options for Designing the Direct Oxidation of Methane to Methanol
509
71
On the Mechanism of Sulfur Removal during Hydroconversion in the Presence of a Catalyst MoS2
518
72
Solution of the Inverse Problem Based on Non-Stationary Data for Chemical Reactions with Nonideal Kinetics
528
73
Optimization by Response Surface Methodology of the Adsorption of Anionic Dye on Superparamagnetic Clay/Maghemite Nanocomposite
533
74
Production of Highly Pure Methyl tert-Butyl Ether
549
75
Recovery of Iron, Nickel, and Copper in Waste Water from Printed Circuit Board Manufacture by Electrodialysis Method
555
76
Processing of Metal-Containing Electroplating Slimes into Mixed Water-Soluble Metal–Carbon Structures
560
77
Alkylation of Phenol with tert-Butanol in a Draining-Film Reactor
569
78
Catalytic Activity of Alumina-Modified Silica Gels in Methanol Conversion to Dimethyl Ether
576
79
Reactive Adsorption Desulfurization of Dibenzothiophene in Presence of Mesoporous Adsorbents
586
80
α-Branched Tertiary Carboxylic Acid Hydrazides as Extractants of Rare-Earth Metal Ions from Sulfate Media
595
81
Adsorption of Alizarin Red onto Carbon Black
601
82
Features of the Behavior of Calcium and Magnesium Phosphate Sorbents in Water and Electrolyte Solutions
607
83
Behavior of Polytrimethylsilylpropyne-Based Composite Membranes in the Course of Continuous and Intermittent Gas Permeability Measurements
616
84
Absorption Properties of Polyurethane Hydrogels Based on Partial β-Cyclodextrin Nitrates and Polyethylene Glycol
624
85
Photostabilization Effect of Pyrazolone Azo Dyes on IR Absorbers in Polymer Films
633
86
Degradation of Polylactide–Polyethylene Blends in Aqueous Media
639
87
Low Surface Energy Polyurethane Coatings Based on Acrylic Copolymer and Polyisocyanate Modified with an Organosilicon Block Copolymer
647
88
Evaluation of the Properties and Structural Characteristics of Organosilane-Modified Chemical Fibers and Polymer Composites Based on Them
656
89
Study of the Magnesite Effect on the Physicochemical and Mechanical Properties of Modified Epoxy Composites
666
90
The Formation of Dense Composite Materials Al2O3–SiCw
674
91
Modified Activated Carbon/Cu(OH)2 Nanocomposite for Oil/Water Emulsion Separation
680
92
An Improved Process for Industrial Production of n-Propyl Bromide
692
93
Thermodynamic Description of Liquid Lithium–Lead Alloys
699
94
Photocatalytic Activity of Titanium Dioxide Immobilized in Polyacrylamide Hydrogels with Different Degrees of Crosslinking
706
95
A New Approach to the Synthesis of Diethyl 2,3-Diisobutylsuccinate, a Component of Titanium–Magnesium Catalysts for Propylene Polymerization
715
96
Low-Temperature Synthesis of Electrically-Conductive Pigment Zinc Oxide Doped with Gallium Donor
726
97
Structuring of Finely Dispersed Ferrosilicoaluminum for Nitride-Containing Ceramics Production
731
98
Synthesis of Ultra-High Molecular Weight Polyolefins of Regular Structure in Octafluorobutane Medium
736
99
Characteristics of Stereoregular cis-1,4-Polyisoprene Obtained under the Conditions of a Large-Tonnage Production Process on Titanium and Lanthanide Catalysts Modified in Turbulent Flows
741
100
Inverse Emulsion Copolymerization of Acrylamide and 2-Acrylamido-2-methylpropane Sulfonic Acid Sodium Salt for Preparing Water-Soluble Drag Reduction Additives
748
101
Investigation of Polyaniline-Modified Aqueous Dispersion Materials and Coatings
758
102
Hybrid Filling of Polyethylene Terephthalate with Multi-Walled Carbon Nanotubes and Short Glass Fibers
768
103
Electret Materials Based on Fluoropolymers Modified with Vanadium- and Phosphorus-Containing Structures
777
104
Oxidative Cracking of Propane in the Presence of Hydrogen
787
105
Life Cycle Assesment of Powertrains Based on a Battery, Hydrogen Fuel Cells, and Internal Combustion Engine for Urban Buses under the Conditions of Moscow Oblast
793
106
Iron(III) Removal from Aluminum Sulfate Solutions by Sorption
813
107
Synthesis and Study of the Electrochemical Properties of Manganese Hexacyanoferrate as a Cathode Material for Na-Ion Batteries
818
108
Photocatalytic Degradation of Antibiotic Norfloxacin Aqueous Solution by Ce/Bi2WO6: Optimization and Simulation of Process by RSM
824
109
Thermally Stable Magnetic Polyurethane Nanocomposites Prepared from Functionalized Polybutadiene: Novel Approach to the Polybutadiene Chemical Modification
835
110
Biomedical Applications of Nanofibers
847
111
Preparation, Study, and Use of Composites Based on Fluoropolymer Waste
873
112
Concise Synthesis of Silver-Containing Titania Xerogels
879
113
Features of Phase Formation during “Dry” Neutralization in the System Na2CO3–H2O–HxAn
884
114
Atomic Layer Deposition and Thermal Transformations of Thin Titanium–Vanadium Oxide Films
890
115
Extraction of Yttrium-Subgroup Rare Earth Elements with Aliquat 336
903
116
Synthesis of High-Purity Basic Bismuth(III) Succinate as a Pharmaceutical Substance
911
117
Copper(II) Stearate-Based Copper-Containing Nanomaterials as Antifriction Additives to Lubricating Oils
920
118
Production of Hydrogen from Propane–Butane Mixture in a Combined Process of Matrix and Steam Conversion
927
119
Comparison of Methods for Encapsulation of Acetyl Salicylic Acid in Polyelectrolyte Capsules Based on Chitosan
934
120
Effect of a Plasticizer on the Properties of Elastomers Based on Polyester with Urethane–Hydroxyl Hard Blocks
940
121
On the Application of Modified Low Molecular Weight Polyethylene in Compositions with Starch
947
122
Formation of the Percolation Network by Carbon Black Particles in Blends of Incompatible Polymers under the Conditions of Shear Strain of the Melt
954
123
Effect of Gaseous Alkanes on Conversion of Straight-Run Naphtha in the Presence of Со(Ni) (ZSM-5, MOR, Al2O3)/SO42–/ZrO2 Composite Catalysts
959
124
Deactivation and Activation of Coordination Catalysts in Liquid-Phase Synthesis of Tris(hydroxymethyl)phosphine
969
125
Heat Release Kinetics in Thermally Initiated 1,4-Diethynylbenzene Polymerization
977
126
Extraction of Palladium(II) with Liquid Membranes Based on Tri-n-Octylammonium and Trialkylbenzylammonium Chlorides under Electrodialysis Conditions
986
127
Change in the Functional Composition of the Carbon Surface upon Water Vapor Activation
996
128
Effect of a Phosphorus-Silicon Containing Flame Retardant on the Activation Energy in Thermal Degradation of Thiol-ene Composites
1002
129
Catalytic Reactors for Dehydrogenation of Liquid Organic Hydrogen Carriers
1011
130
Nanotechnology of Molecular Layering in Production of Inorganic and Hybrid Materials for Various Functional Purposes (a Review): I. History of the Development of the Molecular Layering Method
1022
131
Thermal Structure of the Filtration Combustion Wave of CаH2 in a Flow of a SiF4 + H2 Mixture
1038
132
Influence of the Deposition Temperature on the Structure of Thin Molybdenum Disulfide Films Formed by Chemical Vapor Deposition
1044
133
Activation Washing off Mechanism of Oil Films from the Solid Surface by Surfactant Aqueous Solutions
1052
134
Properties of a Composite Material Based on a Copper-Containing Metal-Organic Framework and Graphene Oxide
1059
135
An Influence of Nano-Sized Fillers Fe3O4, ZnO on the Thermal Oxidation Resistance of Inhibited Polyethylene
1066
136
Influence of the Chemical Composition of an Epoxy Resin and of Its Filling with Nanoparticles of Iron, Aluminum, and Their Oxides on the Enthalpy of Curing with m-Phenylenediamine
1072
137
Effect of Carbon Nanotube Functionalization on the Physicochemical and Mechanical Properties of Modified Fiber-Reinforced Composites Based on an Epoxy Resin
1080
138
Substituted Propargylamines—Acid Corrosion Inhibitors for Steel in Petroleum Industry
1088
139
Synthesis and Electrochemical Properties of Manganese Dioxide as Cathode Material for Aqueous Zinc-Ion Batteries
1097
140
Recovery of Zinc, Copper, Nickel, and Cobalt from Electroplating Wastewater by Electro-Nanofiltration
1105
141
Novel Сarbon Dots for Corrosion Inhibition of N80 Carbon Steel in 3% Saturated CO2 Saline Solution
1111
142
Experimental and Computational Studies of N-(4,6-Dimethylpyrimidin-2-yl)-4-[(quinazoline-4-yl)amino]-benzene-1-sulfonamide as an Effectual Corrosion Inhibitor for Mild Steel in Hydrochloric Acid
1122
143
Specific Features of the Action of a Nanosecond Relativistic Electron Beam on a Syntactic Foam with the Butadiene–Acrylonitrile Rubber Base
1134
144
Preparation and Photoluminescence of Europium(III) Complexes with TPPO as Neutral Ligand
1147
145
Aqueous Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization: Synthesis, Properties, and Application of an Amphoteric Superplasticizer
1153
146
Diameter Dependent Fluorescent Intensity of Amorphous TbxOy Nanowire Arrays and Their Tunable Fluorescent Intensity Induced by Eu3+/Sm3+ Doping
1163
147
Multi-Stage Extractive Purification of Visbreaking Gas Oil with N,N-Dimethylformamide
1168
148
Prospects for Using Graphene Nanomaterials: Sorbents, Membranes, and Gas Sensors
1177
149
Nanotechnology of Molecular Layering in Production of Inorganic and Hybrid Materials for Various Functional Purposes: II. Molecular Layering Technology and Prospects for Its Commercialization and Development in the XXI Century
1189
150
Extraction of Aluminum Hydroxide from Aqueous Chloride Solutions in the Presence of Hardness Salts and Surfactants of Various Nature
1216
151
Synthesis and Analytical Characteristics of New Membrane Materials for Thallium(I) Selective Sensors
1222
152
Synthesis of Polysilazane by Ammonolysis of Dichlorosilane in a Nucleophilic Solvent
1226
153
Thermal Oxidation Resistance of Polyethylene Films Containing Copper and Ascorbic Acid
1232
154
Synthesis, Heat Resistance, and Mechanical Properties of Cross-Linked Urethane–Imide Copolymers Containing Blocks of Two Structurally Different Aliphatic Fragments (Polyether and Polyester) in the Backbone
1240
155
Synthesis of Selenium Nanoparticles Stabilized with Sodium Carboxymethylcellulose for Preparation of a Long-Acting Form of Prospidine
1259
156
Aging Study of a Paste Explosive Based on RDX/RTV (Cyclotrimethylenetrinitramine/Room Temperature Vulcanizing) Silicone Using Rheological Property
1267
157
Vinyl Acetate Semi-Continuous Emulsion Terpolymerization with Butyl Acrylate and 2-Ethyl Hexyl Acrylate Monomers
1275
158
Effect of Steam–Air Treatment of Alumina–Chromia Dehydrogenation Catalysts on Their Physicochemical and Catalytic Characteristics
1283
159
Comparison of Physicochemical Properties and Catalytic Activity in the m-Xylene Isomerization of Catalysts Based on ZSM-12 Zeolites Prepared at Hydrothermal Conditions and under the Action of Microwave Radiation
1292
160
Methanol Dehydrogenation to Methyl Formate Catalyzed by Cu/SiO2 Catalysts: Impact of Precipitation Procedure and Calcination Temperature
1302
161
Study on Optimal Conditions of Oxidative Desulfurization over Hierarchical CoAPO-5 Catalysts Using Response Surface Method
1313
162
Adsorption-Extrographic Preconcentration of Petroleum Vanadyl Porphyrins from Dimethylformamide Extract of Heavy Petroleum Asphaltenes
1324
163
Effect of Synthesis Parameters on the Structural, Optical and Electrical Properties of Successive Ionic Layer Adsorption and Reaction (SILAR)-Deposited CuO Thin Films
1334
164
Development of Low-Cost Silica-Based Core Material for Fire-Resistant Doors of Vessels
1344
165
Tire Pyrolysis. Process Features and Composition of Reaction Products
1351
166
Poly(epichlorohydrin) Modified (PECH/NTO/PO(OH)2) as a New Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Medium: Synthesis, Electrochemical, Termodynamic, Surface Study
1389
167
Study of Water Absorption by Polyamide Composites Filled with Lignin-Derived Graphite Materials
1406
168
Stability and Structural and Rheological Properties of Epoxy Emulsions. Stabilization of Emulsions by Polymer Microparticles
1412
169
Synthesis of Biodiesel Using Heterogeneous Catalyst Sodium Hydroxide Impregnated on Naturally Available SiO2
1427
170
Fabrication of a Novel BiVO4/NiFe2O4/ATP Composite Photocatalyst with Enhanced Visible Light Photocatalytic Performance for Degradation of Malachite Green
1436
171
Nanocomposites of Graphene Oxide and Metal-Organic Frameworks
1453
172
Synthesis of Struvite in Aqueous-Salt Systems in which Competing Phases of Magnesium Phosphate Crystal Hydrates of Different Compositions Can Be Formed
1469
173
Specific Features of the Anodic Behavior of Ti–Nb Alloys in Acid Solutions
1483
174
Improvement of the Physicomechanical and Corrosion-Protective Properties of Coatings Based on a Cycloaliphatic Epoxy Matrix
1489
175
Synthesis and Characterization of Carboxymethyl Cellulose-graft-Poly(Acrylamide-co-Crotonic Acid) Hydrogel: Matrix for Ammonium Nitrate Release, as Agrochemical
1499
176
Microwave-Stimulated Conversion of a Tar/Lignin Blend into Hydrocarbons in a Plasma-Catalytic Mode
1513
177
New Technology and Equipment for Processing of Petcoke Waste
1525
178
Investigations on the Formation of Transition Metal Phosphides during the Hydrotreating of Light Cycle Oil
1536
179
A Review in Linear Alkylbenzene (LAB) Production Processes in the Petrochemical Industry
1546
180
Natural Dyes from Ornamental Plants as Sensitizers for Dye-Sensitized Solar Cells (DSSCs): A Review on the Structure-Activity Relationships (SARs) between Power Conversion Efficiencies and Chemical Constituents
1561
181
The Development of Corrosion Inhibitor Used in the Automotive Coolant
1577
182
Liquid Crystal Polymers: Overview of Characteristics and Applications in Communication and Biomedical Technologies
1585
183
A New Sulfonic Acid Cation-Exchange Resin Based on Polyvinyl Chloride and Its Evaluation in Water Softening
1594
184
Reaction of Phosphorous Acid with tert-Butylphenyl Glycidyl Ether and Evaluation of the Product as a Rubber Antiaging Agent
1602
185
Composition and Properties of Aqueous Fluoroplastic Dispersion for Deposition of Metal–Polymer Coatings
1608
186
Cross-Linking in the Molecular Structure of Poly(vinyl butyral) and Properties Investigation
1614
187
Ionic Liquid-Assisted Preparation of Co3O4 Nanosheets as a New and Efficient Catalyst for Green Synthesis of Various 1,5-Benothiazepine Derivatives in Water
1624
188
Extraction Treatment of Delayed Coker Heavy Gas Oil with N-Methylpyrrolidone
1635
189
Enhanced Photocatalytic Activity over La(OH)3/CaTiO3 Heterostructure on the Degradation of Methylene Blue
1641
190
Nanocrystalline Lanthanum Cobaltite as a Material for Gas Sensors
1651

№
стр.
1
Hydrophobization of Inorganic Materials by Chemical Modification of the Surface
1
2
Modification of Polymer Membranes for Use in Organic Solvents
14
3
Synthesis and Research of Functional Layers Based on Titanium Dioxide Nanoparticles and Silica Sols Formed on the Surface of Seeds of Chinese Cabbage
25
4
Electrospinning of Aqueous Solutions of a Triethylammonium Salt of Polyamic Acid and Properties of the Nonwoven Polyimide Materials
35
5
Heat Resistance and Dynamic Mechanical and Rheological Properties of a Blend of Crystallizing Polymers, Polyimide and Copoly(urethane—imide), at Identical Chemical Structure of the Imide Blocks in the Initial Polymers
45
6
Sorption Properties of a Magnetic Composite Based on Modified Carbon Nanotubes: Influence of the Synthesis Conditions
57
7
Possibility of Producing Semisolid Dosage Forms Based on Aqueous Solutions of Chitosan Succinamide in the Presence of Modification Additives
65
8
Preparation and Properties of a Thermoplastic Partially Crystalline Polyimide in the Oriented State
72
9
Obtaining and Properties of L-Aspartic Acid Solutions of Chitosan
80
10
Optical and Morphological Characteristics of Polymer Molecular Brushes with Varied Grafting Density and Binary Bioactive Radachlorine-Containing Nanosystems Based on Them
89
11
Depolymerization of Alkaline Lignin in the Medium of Supercritical 2-Propanol
99
12
Catalytic Hydrogenolysis of Solketal on Bifunctional Catalysts with Production of High Octane Components of Motor Fuels
108
13
Catalysts Pt/(Ga)Al2O3 Obtained Using Aluminum Metal Activated with Gallium
118
14
Conversion of Methanol to Aromatic-Rich Gasoline over High-Efficiency Bifunctional Catalysts: Green Synthesis of GaZSM-5 Zeolites via Dry-Gel Conversion Strategy
127
15
Highly Selective MTO Reaction over a Nanosized ZSM-5 Zeolite Modified by Fe via the Low-Temperature Dielectric Barrier Discharge Plasma Method
137
16
Factor Analysis of the Relationship of the Chemical Structure and Anti-Radical Activity of Natural Phenols
149
17
Selective Hydrogenation of Dicyclopentadiene
159
18
Copolymers of N-Vinylpyrrolidone with N-(p-Acetoxy)phenylmaleimide and Its Oxime: Synthesis and Sorption Properties
167
19
Production and Kinetics of Swelling in Water of Biocompatible Branched Polyvinyl Alcohol Films
176
20
New Complex Epoxy Ester Resin-Based Binder: Synthesis and Influence on the Curing Process of Epoxyamine Compositions
182
21
Heat Resistance and Electrophysical Characteristics of Polyheteroarylenes and Ferroelectric–Polymer Film Composites Based on Them
188
22
Modification of Compounds Based on Ethylene–Propylene–Diene Rubbers Using an Oligomeric Unsaturated Polyketone
197
23
Influence of the Reactivity of the Thermosetting Component in the Resol Resin/Ethylene Glycol System on the Properties of Pyrolyzates
204
24
Hydrophobization of Porous Ceramic Materials Based on Quartz Fibers with Solutions of Tetrafluoroethylene Telomers
212
25
Synthesis of Multilayer Graphene Oxide in Electrochemical Graphite Dispersion in H2SO4
219
26
Flocculation of Titanium Dioxide with Functionalized Citrus Pectin
225
27
Optimal Optical Properties–Hardness Ratio of Antireflection Coating Produced from a Silica Sol with Hexadecyltrimethylammonium Bromide on Silicate Glass
232
28
Extraction of Iron(III) with Tributyl Phosphate from Bromide Solutions
238
29
Microemulsions in Sodium Dodecyl Sulfate–1-Butanol–Extractant–Kerosene–Water Systems for Extracting Nonferrous Metals from Oxide Raw Materials
244
30
Composite Membranes Based on the Poly(1-trimethylsylyl-1-propine): Influence of the Porous Aromatic Frameworks Produced from the Friedel–Crafts Reaction and Introduced into the Polymer Matrix
252
31
Selective Hydrogenation of Phenylacetylene on a Pd-Containing Catalyst Based on a Polymer Layered Substrate
258
32
Activity of Supported Binary Indium–Cobalt Oxide Catalysts in Reduction of Nitrogen(I, II) Oxides with Carbon Monoxide
268
33
Photocatalytic Properties of Materials Based on Titanium(IV) Oxide and Silver Nanoparticles
274
34
Photocatalytic Oxidation of Thiocianates in Aqueous Solutions
281
35
Nickel Supported on Alkaline Earth Metal–Doped γ-Al2O3–La2O3 as Catalysts for Dry Reforming of Methane
289
36
Nickel–Ceramic Electrodes with High Nickel Content for Solid Electrolyte Electrochemical Devices
299
37
Facile Oxidation Approach to Amend Surface Chemistry of Carbon Particles for Augmented Dispersion in Epoxy Matrix
305
38
Lithium–Tellurium System: Thermodynamic and Electrochemical Studies and Prospects for Use in Chemical Current Sources
313
39
Thermal Conductivity of Calcium Aluminate and Complex Vanadates of Garnet Structure
325
40
A Detergent Prepared from Iminodiacetate Derivatives of Fats and Polymucosaccharides from Base Hydrolyzates of Protein-Containing Waste
333
41
Influence of Concentration of Precursors and Solvent on the Size of Zinc Sulfide Nanoparticles Produced in Ionic Liquid Medium
340
42
Production of Potassium Sulphate by Conversion of Phosphogipsum and Potassium Chloride in Ammonia Solution
346
43
Effect of Gaseous Products on the Kinetics of Thermal Decomposition of Chloride-Containing Complex Ammonium Nitrate-Based Fertilizers
352
44
Synthesis of Composite Materials in the System Cr–Ti–B by the Self-Propagating High-Temperature Synthesis from Mixtures CaCrO4/TiO2/Al/B
362
45
An Effect of Parameters of the Reverse Electrolysis Mode on Composition and Properties of Zinc–Nickel–Cobalt Alloy
369
46
Electrodeposition of Fe–W Coatings from a Citric Bath with Use of Divided Electrolytic Cell
375
47
New Ecofriendly Nitrogen-Doped Carbon Quantum Dots as Effective Corrosion Inhibitor for Saturated CO2 3% NaCl Solution
380
48
Experience of Use of Melt Polymeric Binders for the Manufacture of Prepregs of Organoplastics
393
49
Preparation of a New Material Based on Epoxy Oligomers for Forming Corrosion-Protective Coatings
400
50
Free Macroradicals in Synthesis, Storage, and Processing of Synthetic Latexes and Polymers
406
51
Grafting of Unsaturated Higher Fatty Acids to Chitosan in Aqueous Medium
420
52
Structure and Properties of Hydrogen Sulfide Sensors Based on Thin Tin Dioxide Films
427
53
Extraction in Emulsion Mode of Higher Fatty Acids from Vegetable Oils by Methanol or Ethanol in Esters Production
437
54
Relation of Structural and Chemical Parameters of Tar Hydroconversion Residue to Catalytic Properties of Nanosized Catalysts Based on Mo, Co, Ni, Al Compounds
449
55
Effect of Hydrogen Addition on Noncatalytic Partial Oxidation of Natural Gas with Oxygen in a Flow Reactor with Increased Calorific Intensity
456
56
Hydrogen Peroxide Decomposition Catalysts Used in Rocket Engines
467
57
Oxidative Dehydrogenation of Ethylbenzene to Styrene on an Exhausted Aluminum Chromium Catalyst
488
58
Synthesis and Visible-Light Photocatalytic Activity of Graphite-like Carbon Nitride Nanopowders
494
59
Pd/SAPO-41 Bifunctional Catalysts with Enhanced Pd Dispersion Prepared by Ultrasonic-Assisted Impregnation: High Selectivity for n-Hexadecane Hydroisomerization
502
60
Nano- and Submicrometer Calcium Pectinate Particles as Carriers of Plant Growth Regulators
512
61
Simulation and Optimization of Wood Biomass Gasification Regimes in a Flow of Steam-Oxygen Blast
519
62
Deep Extraction of Fullerene-Containing Carbon Black with a Polar Solvent: Analysis of Products
527
63
Influence of Hydrothermal Treatment Conditions on the Formation of Lanthanum Orthophosphate Nanoparticles of Monazite Structure
540
64
Preparation of High-Purity Lithium Carbonate Using Complexing Ion-Exchange Resins
549
65
Effects of Dry-Jet Wet Spinning Parameters on Properties of Polysulfone Hollow Fiber Membranes
554
66
Study of Properties of Film Materials Based on Cellulose and Polyurethane Rubbers for Drainage of Oils
564
67
Properties of Solutions of Cellulose and Chitin with Montmorillonite Nanoparticles in Aqueous Alkali with Urea and Thiourea Additions and of Composite Films Prepared from These Solutions
572
68
Influence of Parameters of Composite Materials Based on Polyvinyl Acetate on Their Dissipative Properties
581
69
Electrophysical Properties of Composites Based on Polyethylene Modified with Multi-Walled Carbon Nanotubes with High Content of Fe–Co-Catalyst
586
70
Ion Exchange Properties of Günterblassite and Gmelinite, Prototypes of Microporous Materials for Water Purification
595
71
Effect of the Solvent Composition on the Content of the Crystalline Phase and Melting Temperature of Paraffin Waxes
603
72
Synthesis of a Novel Phosphorus-Containing Curing Agent and Its Effects on the Flame Retardancy, and Thermal Stability of Epoxy Resins
611
73
Methane Pyrolysis for Hydrogen Production: Specific Features of Using Molten Metals
625
74
Formation of Anisotropic Hydroxyapatite Particles under Hydrothermal Conditions
633
75
Mild Mechanochemical Synthesis of Nanodispersed Composites Magnetite@M(II)-Fe Layered Double Hydroxides (M = Mg, Ni)
639
76
Synthesis of Zinc-Doped Lithium Tantalate Charge in the Technology of Novel Crystalline Functional Materials
645
77
Study of the Effect of Boron and Carbon Modifying Additives on Heat Resistance of a Ceramic Material Based on Silicon Carbide
654
78
Core–Shell Composites Based on Partially Oxidized Blend of Detonation Synthesis Nanodiamonds
661
79
Preparation and Structural and Electrochemical Characteristics of a Carbon-Containing Material Based on Aspen Bark Modified with Zinc and Iron Chlorides
672
80
Effect of Liquid-Phase Oxidative Treatments on the Purity, Hydrophilicity, and Structure of Single-Wall Carbon Nanotubes and on the Electrical Conductivity of Their Arrays
679
81
Production and Research of Fullerene-Modified Chemical Adsorbent of Ammonia Based on Activated Carbon
691
82
The Effect of Hexene-1 in Feedstock on the Yield of Target Products during Thermal Pyrolysis of n-Hexane
698
83
Features of Epoxidation of Fatty Acid Methyl Esters in a Bubble Reactor
704
84
Synthesis and Herbicidal and Antioxidant Activity of a Series of Hetero- and Carbocyclic Derivatives of Monochloroacetic Acid
712
85
Effect of the Isopropanol Impurity in the Feed on Catalytic Dehydration of Bioethanol to Ethylene
721
86
Kinetic Relationships of Liquid-Phase Oxidation of Styrene with Hydrogen Peroxide in the Presence of Polyoxotungstate Modified with Cerium Cations
729
87
Synthesis of Mesoporous Silica Gel Doped with Dysprosium and Modified with Nickel and Study of Its Selectivity in the Catalytic Hydrogenation of a Benzene and Its Derivatives
741
88
Dielectric Spectroscopy of Vegetable Oils
748
89
Synergism of Triallyl Cyanurate and Divinylbenzene in a Dynamically Vulcanized Blend of Polypropylene with Hydrogenated Styrene–Butadiene–Styrene Block Copolymer
757
90
Carbon Dioxide Reforming of Methane
765
91
Comparison of the Turbulent Drag Reduction Effectiveness of Polymers from Higher Olefin Monomers (Hexene, Octene, Decene, Dodecene) in the Production of Hydrodynamic Drag Reducing Agents for Transportation of Hydrocarbon Liquids
788
92
Study of Heat Resistant Urethane Varnish Coatings Based on Isocyanate-Containing Prepolymers and Dicyandiamide
794
93
Synthesis and Study of Framework Azomethine Compounds as Ingredients of Rubber Stocks
801
94
Specific Features of Oxidation of Sodium Tetradecahydroundecaborate to Decaborane with Manganese Dioxide
807
95
Synthesis of Dicalcium Silicate in the Presence of Dust from Electrostatic Precipitators of Cement Kilns
813
96
Dependence of Antimicrobial Activity of Zinc Oxide Nanodispersions on the Shape and Size of the Particles
821
97
Processing of Nitric Acid Solutions to Produce Bismuth Nitrate Pentahydrate
826
98
The Effect of Surface Polarity on the CMP Behavior of 6H-SiC Substrates
832
99
Influence of CNTs on Microstructure and Corrosion Behavior of Biomedical CoCrMo Coatings by Laser Cladding
838
100
Application of Low-Temperature Solvolysis for Processing of Reinforced Carbon Plastics
845
101
Features of Structural Transformations and Properties of Polycaproamide Modified with Polyfluorated Alcohol Immobilized on Montmorillonite
854
102
The Polymers Forming the Covers of Calcium Carbonate Cores. Influence of Their Rheological Characteristics on the Structure and Function of Oral Delivery Systems
861
103
Application of Shungit for Neutralization of Toxic Components of Hydrazine Fuel
870
104
Behavior of the Sewage Sludge Ash under the Conditions of High-Temperature Processing
881
105
Influence of the Composition of the Sulfuric Acid Cation Exchanger on the Efficiency of Chromatographic Purification of Petroleum Vanadyl Porphyrins
888
106
Effect of Substituents on the Energy Barrier of Internal Rotation in Aminonitroethylenes
897
107
Degradation of Industrial Phenolic Wastewater Using Dielectric Barrier Discharge Plasma Technique
905
108
The Effect of NaCl Concentration on the Phase Inversion Temperature and Droplet Sizes of Liquid Paraffin Nanoemulsions
916
109
A Catalytic System Based on an Ionic Liquid for Preparing High-Octane Components of Gasoline Fuels by Isomerization of Light n-Paraffins
920
110
A Cellular Ceramic as a Catalyst Support for Radiolytic Gas Recombination Devices
927
111
Production of Aromatic Hydrocarbons from Syngas: Principles, Problems, and Prospects
933
112
Effect of Temperature and Pressure on Conversion of Methane and Lifetime of the Catalyst in the Catalytic Decomposition of Methane
954
113
Photocatalytic Generation of Hydrogen from Organic Substances Using Iron-Containing Composites under the Conditions of UV and Visible Irradiation
960
114
Synthesis and Catalytic Activity of Quaternary Ammonium Salts Containing gem-Dichlorocyclopropane and 1,3-Dioxolane Fragments
967
115
Desulfurization of Gasoline Fuel via Photocatalytic Oxidation/Adsorption Using NaX Zeolite-Based under Mild Conditions: Process Optimization by Central Composite Design
973
116
The Use of Modified Clay as an Efficient Heterogeneous and Ecofriendly Catalyst for the Synthesis of Chalcones via Claisen-Schmidt Condensation
983
117
Alkylation of Toluene with tert-Butyl Alcohol over Different Zeolites with the Same Si/Al Ratio
991
118
Thermal Oxidation Degradation of a Polymer Composite Material Based on Polytetrafluoroethylene and Oxyfluoride Glass
998
119
Composite Films Based on Polyvinyl Alcohol and Na-Carboxymethyl Cellulose for Separation
1003
120
Anionic Copolymerization of Acrylonitrile with Methyl Acrylate under the Action of a Novel Initiating System Based on a Bicyclic Tertiary Amine and Ethylene Oxide
1009
121
Rheological Properties and Water-Retaining Power of Agar Hydrogels with Carboxymethyl Cellulose
1019
122
Rising the Efficiency of the Isoprene Bulk Polymerization Apparatuses
1027
123
Thermal Degradation of Nafion in the Presence of Nanostructured Materials: Thermally Expanded Graphite, Carbon Black, and Platinum
1034
124
Spontaneous Surface Convection and Extraction (Stripping) Rate in Systems with Tributyl Phosphate and Di(2-ethylhexyl) Hydrogen Phosphate
1042
125
Removal of Carcinogenic Polycyclic Arenes from Aromatic Softener Oils by Extraction with Dimethyl Sulfoxide and N-Pyrrolidone–Ethylene Glycol Mixed Extractant
1049
126
Leaching of Impurities from Poor Intermediate Products of Refining Production in Autoclave Conditions
1054
127
Feasibility of Acid–Salt Processing of Alumina-Containing Raw Materials in a Closed-Loop Process
1059
128
Electrolysis with Fibrous Carbon Electrodes in Recovery of Platinum Metals from Mineral and Secondary Raw Materials
1068
129
Hydrothermal Synthesis of Al-Doped ZnO with a Novel Cactus Microstructure and Their Gas Sensitivity Research
1077
130
Development of the Detonation Nanodiamond Synthesis from Tetryl Based Ternary Mixtures
1083
131
Features of Methyl Linoleate Oxidation in Triton X-100 Micellar Buffer Solutions
1090
132
Thermodynamic Estimating the Mass Transfer of Compounds of Rare Metals under Conditions of a Filtration Combustion Wave
1096
133
Potassium–Sulfur System: Thermodynamic Properties, Electrochemical Studies, and Prospects for Use in Chemical Current Sources
1103
134
Synthesis of Aluminum Oxides with Controlled Textural and Strength Parameters
1115
135
Thermoelectric Properties of a Phase-Heterogeneous Ceramic Based on Ca3Co4O9+δ, Prepared by Hot Pressing
1126
136
Synthesis and Physicochemical Properties of Complex Oxides K2MexTi8–xO16 (Me = Mg, Ni, Al) of Hollandite Structure
1132
137
New Propargyl-Containing Derivatives of Phosphoric and Phosphonic Acids: Prospective Inhibitors of Acidic Corrosion of Steels for Oil Production
1139
138
High Efficiency Electrodes for Alkaline Electrolysis of Water
1146
139
Inhibition of Copper Corrosion with N-Arylaminotriazoles in Aqueous Chloride Solutions and in Air
1152
140
Supercapacitor Electrode. Formation Based on Thoil-Functionalized Graphene Oxide
1160
141
Frost-Resistant Elastomers with Controllable Microphase Segregation, Based on Epoxy–Ether–Urethane Oligomers
1172
142
Structural, Rheological, and Mechanical Properties of Binary Compounds Based on High-Density Polyethylene and Linear Low-Density Polyethylene
1179
143
Use of Zinc-Aluminum Layered Double Hydroxides as Nanofillers of Thermoplastic Vulcanizates
1188
144
Influence of Structure of Chemically Grafted onto Polyethylene Surface Two-Component Titanium-Phosphoroxide Nanostructures on the Properties of Composite Material
1192
145
Magnetite–Activated Carbon Nanocomposites: Synthesis, Sorption Properties, and Bioavailability
1202
146
Synthesis of Surface-Porous Sorbents Based on Silicon Dioxide and Studying Their Adsorption Properties
1211
147
Nitrogen Doped Porous Reduced Graphene Oxide Hybrid as a Nanocarrier of Imatinib Anticancer Drug
1221
148
Synthesis of Mesoporous Zn-doped TiO2 Nanoparticles by Colloidal Emulsion Aphrons and Their Use for Dye-sensitized Solar Cells
1229
149
Preparation of Flame-Resistant Liquids Based on Mixed Tri(phenyl, p-tert-butylphenyl) Phosphates by Transesterification of Triphenyl Phosphate with p-tert-Butylphenol
1237
150
New Matrix Compounds for the Detection of Carboxyl-Containing Nonsteroidal Anti-Inflammatory Drugs by MALDI Mass Spectrometry
1244
151
Thermal Decomposition of Polychlorobiphenyls and Their Derivatives
1254
152
Conversion of Dimethyl Ether to a Triptane-Enriched Mixture of Liquid Hydrocarbons: Influence of Modifier and Reaction Conditions
1261
153
Pathways of Chemical Recycling of Polyvinyl Chloride: Part 1
1271
154
Key Technology Development Priorities for the Oil Refinery Sector in Russia
1314
155
Qualitative and Quantitative Analysis of the Publication Activity of Russian Research Institutions in the Field of Applied Chemistry
1326
156
Synthesis of Stearyl Methacrylate–Glycidyl Methacrylate Copolymers and Their Use as Multifunctional Additives to Diesel Fuel
1332
157
Effect of Active Diluents on Properties of Epoxy Compounds and Coatings Based on Them
1340
158
Study of Thermochemical Transformations of Bast of Birch Bark, Structure and Properties of the Produced Porous Carbon Materials
1349
159
Features of the Sorption of Rhodium(III) from Chloride Solutions on an Ion Exchange Resin with Thiouronium Functional Groups
1359
160
Magnetoactive Compound Based on Humic Acid and Magnetite as a Sorbent for Heavy Metals
1366
161
Surface Preparation of Aluminum Alloys for Electroplating
1372
162
Application of Intermetallics (La,Ce)Ni5 in Hydrogen Energy Storage Systems
1380
163
Synthesis and Thermoluminescence of Borates Pb1–xEuxCd2B6O12
1387
164
Effect of the Degree of Sulfoethylation of Polyaminostyrene on Its Acid-Basic Properties and Specificity of Interaction with Transition Metal Ions
1392
165
Preparation of Fe3O4–HNTs Hybrid Material and Its Effect on Epoxy Coating Properties
1399
166
Nanocomposites Based on Biocompatible Thermoelastoplastic and Carbon Nanoparticles for Use in Cardiovascular Surgery
1412
167
Liquid-Phase Oxidation of Hydrogen Sulfide in Oil with Molecular Oxygen in the Presence of an Ammonia Solution of Cobalt Phthalocyanine
1421
168
Shape Selectivity in Hydroisomerization of n-Hexadecane over Pd Supported on Zeolites: ZSM-22, ZSM-12 and Beta
1427
169
The Modified Clay as a New and Eco-Friendly Catalyst for the Knoevenagel Reaction
1438
170
Pathways of Chemical Recycling of Polyvinyl Chloride. Part 2
1445
171
Investigation of the Effect of Mono- and Diurethane Units on the Deformation and Strength Properties of Polyurethanimides
1491
172
Synthesis and Structure of Grafted Copolymers of Acrylic Acid and Low Molecular Weight Polyethylene
1498
173
Cure Kinetics of Epoxyurethane Compositions with Amine Hardeners of Various Nature
1504
174
Silvering of High-Porosity Cellular Ceramic Materials
1518
175
Ni–TiO2 Functional Composite Coatings Deposited from an Electrolyte Based on a Choline-Containing Ionic Liquid
1525
176
Kinetic Regularities of Etching Thin Lead Sulfide Films in Hydrochloric Acid Solutions Containing Hydrogen Peroxide and Glycerol
1533
177
Attrition of Particles in Fluidized Bed Apparatuses
1538
178
Method for Determining the Rate Constants of Chemical Reaction Stages in an Enclosed Gradientless Reactor
1544
179
An Amidinato-Cerium Compound and Its Application as CVD Precursor for CeOx-Based Materials
1553
180
Multilayer Engineering of Polyaniline and Reduced Graphene Oxide Thin Films on a Plastic Substrate for Flexible Optoelectronic Applications Using NIR
1561
181
Synthesis of Glyoxylic Acid by Glyoxal Oxidation in the Presence of Hydrohalic Acids
1571
182
Alkylation of Isobutane with Butylenes on Catalysts with Various NaX Zeolites in the CaLaHX Form
1578
183
Features of the Isobutane Alkylation with Butylenes on Zeolite Catalysts
1586
184
Petrochemical Industry in Russia: State of the Art and Prospects for Development
1596
185
Analysis of the Safety of Using Hydrocarbon Fuels and Hydrogen in Automobiles
1604
186
Fabrication of Highly Active Ag3PO4/ZnO/Diatomite for Visible Light Photocatalytic Degradation of Tetracycline Hydrochloride
1615
187
Synthesis of Environmentally Safe Antiwear Additives to Lubricating Materials: State of the Art and Prospects
1629
188
Synthesis and Study of 1-Alkenyl-2-propargyloxy-3-aminomethylbenzenes as Acid Corrosion Inhibitors and Antimicrobial Additives to Cutting Fluids
1638
189
Synthesis of Monomers for Promising Membrane Materials, Polyalkylenesiloxanes
1646
190
Structure and Properties of Carboxymethyl Chitin in the Salt, Acid, and Mixed Forms
1655
191
Mechanochemical Modification of Activated Carbon in Air
1661
192
Composites Based on Polyaniline and Activated IR-Pyrolyzed Polyacrylonitrile As Promising Supercapacitor Electrode Materials
1667
193
Composites Based on Alicyclic Copolyimide and Polyacrylamide
1675
194
Chemical, Plasma Chemical, and Photochemical Methods for Preparing Digermane
1681
195
Structural Features of Ni–W Alloy Deposited from Pyrophosphate Electrolyte
1688
196
Solid Phase Interaction of the Recondensed Finely Dispersed Mixture (VC0.40O0.53–C) with Titanium Hydride
1696
197
Formation of Hydrogen Peroxide under the Action of Microwave Radiation in Aqueous Solutions of Vanadyl and Permanganate Ions
1705
198
Application of Natural Clays for Purification of Rapeseed Oil from Colorant
1710
199
Mathematical Modeling of the Operational Activity of Adsorbents
1715
200
Relationships of the Production of Hydrogen-Containing Gas from Methane on a Pilot Installation with a Moving Bed of a Microspherical Catalyst and Separate Supply of the Feed and Oxidant
1729
201
Choosing a Microspherical Catalyst for Partial Oxidation of Methane to a Hydrogen-Containing Gas
1737
202
Making an Anode of a Hydrogen–Air Fuel Cell More Tolerant to CO: PtRuCo/C Catalyst and Synergistic Effect of PtRu/C and Oxygen Additives
1743
203
Utilization of Acid Tar with Use of Amines
1750
204
Сement Mortars with Alkali-Free Accelerators under Test Conditions for Alkali-Silica Reactions
1758
205
Nanocomposite Coatings Based on Modified Graphene Oxide and Polydimethylsiloxane: Characterization and Thermal Properties
1765
206
Prospects for Production and Use of Hydrogen as one of Directions of the Development of Low-Carbon Economy in the Russian Federation
1775
207
On the Possibility of a Radical Increase in Thermal Conductivity by Dispersed Particles
1796
208
Hydrogen Storage Using Liquid Organic Carriers
1815
209
Hydrogenation of Intermetallic Compounds ACo3 (A = Ce, Y) with Hydrogen and Ammonia
1831
210
Synthesis and Electrochemical Research of the Properties of Mixed Nickel-Cobalt Oxides as Materials for Energy Storage Devices
1837
211
Effect of Modifying Photostabilizing Additives on the Properties of a Model Sample of an Epoxy Oligomer Cured with an Amine Curing Agent
1845
212
Regularities in the Dependence of the Enthalpies of Formation of Certain Conjugated Polynitrogen Heterocyclic Compounds on Their Structure
1852
213
Sorption Recovery of Lanthanum, Iron, Aluminum, and Calcium Ions from Phosphoric Acid
1868
214
Adsorption of 1,2-Dichlorobenzene on a Carbon Nanomaterial Prepared by Decomposition of 1,2-Dichloroethane on Nickel Alloys
1873
215
Synthesis of a New Benzoate Plasticizer for Polyvinyl Chloride Based on a 2-Ethylhexanol By-Product
1883
216
Spectroscopic and Morphological Study of Irradiated PVC Films Doped with Polyphosphates Containing 4,4'-Methylenedianiline
1888
217
Study on Oxidative Desulfurization of Simulated Oil Catalyzed With Glycine Modified Phosphotungstic Acid
1899
218
Photocatalytic Studies of La,Ce Co-Doped ZnO Nanoparticles
1906
219
Formation of the Active Surface of the FeCrAl Catalyst under Electric Current Heating Conditions
1920
220
Opportunities and Challenges to Deploy Industry 4.0 Technologies in the Russian Oil Refining and Petrochemical Industries
1926
221
A Novel Phosphorus/Silicon-Containing Flame Retardant—Functionalized Graphene Nanocomposite: Preparation, Characterization and Flame Retardancy
1931
222
Silicon-Reduced Graphene Oxide Composite as Negative Electrode of Li-Ion Batteries
1940
223
Wear Behavior of Chemically Bonded Ceramic Coatings Reinforced by MWCNTs–ZnO Hybrid Material
1947
224
Optimization of Combustion Efficiency Using a Fuel Composition Based on CH4 and/or H2
1954
225
Al-Doped Dumbbell-Like ZnO for Enhanced Ethanol Sensing Performance
1960
226
Modification of Mineral Powder by Various Organic Materials: Their Potential as Reinforcement for Unsaturated Polyester Composites
1968
227
Synchronized Esterification and Transesterification of Jatropha Curcas Using Ferric Sulfate Modified Snail Shells As a Bi-Functional Catalyst: A Box-Behken Optimization Approach
1976

№
стр.
1
Retraction Note to: Study on Methylation of Naphthalene with Methanol over ZSM-5 (core)/SAPO-11(shell) Composite Molecular Sieve Alcohols
0
2
Erratum to: Study of the Microarc Oxidation of Aluminum Modified with Silicon Carbide Particles
0
3
Erratum to: Thermochemical Reaction of Lead Oxide with a Polytetrafluoroethylene Matrix
0
4
Erratum to: Sorption of Lanthanum(III) and Neodymium(III) from Concentrated Phosphoric Acid by Strongly Acidic Cation Exchange Resin (SQS-6)
0
5
Synthesis, Characterization, and Catalytic Properties of Metal-Polymer Complexes Based on Copolymers of Polyethylene(propylene) Glycol Maleates with Acrylic Acid
1
6
Prospects for Using Styrene-Isobutylene-Styrene (SIBS) Triblock Copolymer as a Cusp Material for Leaflet Heart Valve Prostheses: Evaluation of Physicochemical and Mechanical Properties
9
7
Study of Copper-Iron Mixed Oxide with Cubic Spinel Structure, Synthesized by the Combustion Method
20
8
Extractive Recovery and Separation of Palladium(II) from Model Hydrochloric Solution from Refining Shop with Di-n-Heptyl Sulfide and Penconazole
31
9
Study of the Interaction with Hydrogen and Ammonia of Titanium and Its Alloys with Iron
35
10
Production of Composite Materials from Peat and Wood by Explosive Autohydrolysis
45
11
Rheological Properties of Chitosan Succinimide in Water-Glycerol Mixed Solvent
50
12
Effect of the Pyrolysis Step on the Filtration Combustion of Solid Organic Fuels
57
13
Co3O4 Nanoparticles Modified TiO2 Nanotube Arrays with Improved Photoelectrochemical Performance
64
14
Three-Dimensional Hierarchical Superstructures of CuO Nanoflowers: Facile Synthesis and Applications for Enhanced Photocatalytic Activity of Dyes
71
15
Properties of Modified Hexagonal Boron Nitride as Stable Nanofluids for Thermal Management Applications
78
16
Study of the Influence Exerted by Microscopic Additives of Fullerenes on the Absorbing Capacity of Cation-Exchange Resins for d-Elements in Aqueous Media
87
17
Adsorbent of Noble Metals, Based on Copolymers of Divinyl Sulfide and 4-Vinylpyridine
93
18
Estimated Contribution of Modifying Elements to the Activity of Zeolite Catalysts in Alkylation of Toluene with Methanol
99
19
Effect of Quinoline on Hydrodesulfurization and Hydrogenation on Bi- and Trimetallic NiMo(W)/Al2O3 Hydrotreating Catalysts
105
20
Photocatalytic Properties of Hollow BiFeO3 Spheres
113
21
Oxidative Transformations of Ethane and Ethylene on VMoTeNbO Catalysts
122
22
Liquid-Phase Hydrogenation of Acetylene to Ethylene in a Flow on Pd/Al2O3 and Pd-Ga/Al2O3 Catalysts in the Presence of CO
128
23
Cysteine-Fe(III) Catalyzed Oxidation of Common Polymer Used in Oilfield by H2O2 in a Wide pH Range
135
24
Enhancing Photocatalytic Activity of Cu2O in Degradation of Sulphonic Acid-Based Dye
141
25
High-Energy Ion Treatment of Lavsan Films Followed by Controlled Track Etching to Obtain Asymmetric Gas-Separation Membranes
150
26
Photocatalytic Generation of Hydrogen in Degrading Soluble Organic Pollutants with Metal-Ceramic Composites
159
27
Fatty Acids of Vegetable Oils as Components of Anti-Wear Diesel-Fuel Additives
166
28
Preparation and Properties of MoO3−TiO2−SiO2 Composites with Spherical Shape of Agglomerates
171
29
Structure and Thermodynamic Stability of LuFe2O4
181
30
Behavior of the Concentrate of Rare Platinum Metals in Autoclave Conditions
186
31
Formation of Thin-Film Electrolyte by Electrophoretic Deposition onto Modified Multilayer Cathode
191
32
Friedel-Crafts Synthesis of New Porous Aromatic Frameworks for Stabilizing Gas Transport Properties of Highly Permeable Glassy Polymers
199
33
Preparation and Properties of Interpolymer Complexes Capable of Soil Structuring
208
34
Thermochemical Reaction of Lead Oxide with a Polytetrafluoroethylene Matrix
218
35
Pervaporation Membranes Based on Interpolyelectrolyte Complexes of an Aromatic Copolyamide Containing Sulfonate and Carboxy Groups
222
36
Conversion of Straight-Run Naphtha to C5−C6 Alkanes on Co(Ni)/HZSM–5/SO 2-4 —ZrO2 Composite Catalysts
228
37
Conversion of Dimethyl Ether to a Mixture of Liquid Hydrocarbons with Increased Triptane Content
235
38
Modified Ozonolytic Synthesis of 4Z-Nonen-1-ol, an Intermediate for the Synthesis of Sex Pheromones of Cotton Bollworm and Cabbage Moth, from the Cyclic Butadiene-Isoprene Codimer
244
39
Effect of Graphene Additions on the NCP Initiation Threshold in Spectrum-Selective Excitation
248
40
Effect of the Degree of Oil Biodegradation on the Crystallization of Methane Hydrate and Ice in Water-Oil Emulsions
254
41
On Application of PC-SAFT Model for Estimating the Speed of Sound in Synthetic and Natural Oil-and-Gas Mixtures
262
42
Microscopic Studies of Diffusion and Segregation Processes in Heavily Loaded Tribosystems
267
43
Filtration Combustion of Hydrocarbon Fluids in a Moving Bed of Inert Heat-Carrying Agent
276
44
Production of Adsorption Materials from Bentonite Clay Containing an Organic Dye
282
45
Study of Sorption Properties of Bog Ores for Extraction of Manganese and Iron Ions from Ground Water
288
46
Effect of Bases on Catalytic Properties of Cobalt-Nitrogen-Carbon Composites in Oxidative Esterification of Benzyl Alcohol with Methanol
295
47
Hydroprocessing of Vacuum Gas Oil on NiMo Sulfide Catalyst Supported on an Ordered Mesoporous Polymer
300
48
Structural and Morphological Properties of Boron Doped V2O5 Thin Films: Highly Efficient Photocatalytic Degradation of Methyl Blue
304
49
Recycling of Palladium and Selected Metal Ions from Simulated Spent Catalysis Waste Solution Using Novel Dithiodiglycolamides Derivatives
310
50
Thermodynamic and Electrochemical Studies of Sodium-Antimony Alloys
321
51
Specific Features of Enzymatic Degradation of Chitosan Acetate and Chitosan Succinamide in Polymer-Colloid Dispersions with Silver Iodide Sols
332
52
Influence of the Peroxide Vulcanization Coagent on the Properties of a Blend of Polypropylene with Hydrogenated Styrene-Butadiene-Styrene Block Copolymer
339
53
Peroxy-Containing Monomers as Coating Components Based on 1,1,2-Trichlorobuta-1,3-diene
347
54
Modification of Maleic Anhydride Copolymers with Aliphatic Alkylamines and Sulfanilamide
351
55
Influence of the Molecular Polyimide Brush on the Gas Separation Properties of Polyphenylene Oxide
360
56
Evaluation of Effectiveness of Solid Fuels Based on High Enthalpy Dispersants for Rocket Ramjet Engines
367
57
Formation of Yttrium-Stabilized Zirconium Oxide Films Deposited from Suspensions
389
58
Effect of Antioxidants on Stability of Aqueous Solutions of Selenurea and on Properties of Lead Selenide Films Obtained with These Antioxidants
394
59
Aramid Textile Laminate for Shock-Resistant Elements of Aviation Constructions
404
60
Synthesis of Biomimetic Materials from Collagen and Hydroxyapatite
410
61
Sorption and Mechanical Properties of Chitosan/Graphene Oxide Composite Systems
415
62
Additives for Carbon Monoxide Afterburning in Gases from Regeneration of a Cracking Catalyst without Noble Metals
423
63
Study of Formation Conditions and Characteristics of Carbon-containing Particles Produced from ortho-Xylene by Aerosol-Assisted Chemical Vapor Deposition
430
64
Dynamics of Uric Acid Sorption on Molecularly Imprinted Sorbent
437
65
Study of Nitration of Hyperbranched Polyglycidols
445
66
Refining of Diesel and Ship Fuels by Extraction and Combined Methods. Part 1. Use of Ionic Liquids as Extractants
453
67
Study of the Stability of a Number of Molecular Impurities in Monosilane
476
68
Conductivity Studies of Glasses in the System WO3−P2O5
482
69
Effect of Characteristics of Magnesium Oxide Powder on Composition and Strength of Magnesium Potassium Phosphate Compound for Solidifying Radioactive Waste
490
70
Synthesis and Magnetic Characteristics of Neodymium Ferrite Powders with Perovskite Structure
498
71
Effect of the Addition of Iron(III) Tetraphenylporphyrin Complex on the Structure of Poly(3-hydroxybutyrate) Fibers Prepared by Electrospinning
505
72
Influence of the Kind of the Components on the Structure of Aerogel-Type Polyvinyl Alcohol/Carbon Black Composite Materials and on Their Resistance to Heat and Mechanical Actions
517
73
Encapsulation of Niacin into Nanocontainers on Ion Exchanger Matrices
523
74
Silicon-Containing Epoxy Composites and Their Use in Marine Coatings Technology
530
75
Catalytic Synthesis of Phosphorus-Containing Extractant: Tributyl Phosphate
543
76
Sorption of Strontium Ions on Potassium-Titanate Nanoparticles of Various Morphology Obtained under Hydrothermal Conditions
549
77
Comparison of Extractive Capacities of Systems Based on Sulfonol, Sodium Dodecyl Sulfate, or Alkyl Benzene Sulfonic Acid
555
78
Bimetallic Sulfur Reduction Additives Based on Alumosilicate of Al-MCM-41 Type For Cracking Catalysts: Desulfurazing Activity vs. Ratio of Components in a Support
562
79
Catalytic Activity of Polyfunctional Ionic Liquids in Oxidation of Model Sulfur Organic Compounds
569
80
Effect of Technological Parameters of Interaction between SiF4 and CaH2 on the Nature of Filtration Combustion
576
81
Refining of Diesel and Ship Fuels by Extraction and Combined Methods. Part 2. Use of Organic Solvents as Extractants
583
82
Two-Dimensional and Screw Growth of MoS2 Films in the Process of Chemical Deposition from the Gas Phase
596
83
Burning of Solid Propellant in Gas Generator of an Air-Breathing Engine at Large Content of Metal
602
84
Laboratory Reactor for Visual Examination of Formation/Decomposition of Gas Hydrates in Water-Oil Systems
607
85
Study of Electrodeposition and Functional Properties of Nickel-Graphite Bisulfate Composite Coatings
614
86
Biomass Conversion Products as Steel Corrosion Inhibitors
620
87
Sorption of Co2+, Pb2+, and Sr2+ Ions on Hydroxyapatite, Synthesized in the Presence of Oxyethylidenediphosphonic Acid
625
88
Sorption of Metal Ions by Chitosan Copolymers with Vinyl Monomers
634
89
Use of Surfactants in Manufacture of Catalysts for Conversion of Methane
639
90
Burning of Sulfur-Containing Liquid Fuels in Fluidized Catalyst Bed
647
91
Catalytic Activity of Highly Dispersed Mn2O3-Bi2O3-ZrO2-CeO2 Solid Solutions (M = Nd, Sm, Gd) in the Reaction of Carbon Monoxide Oxidation
655
92
Interaction of Perfluorinated Fluids with Fluorine in Gas-Liquid Reactor
661
93
Norbornene Copolymers with Acrylates Bearing Norbornane Moieties: Promising Materials for Optoelectronics
667
94
Synthesis of Polyol Tetrabromophthalate and Its Use as a Component for Preparing Foamed Polyurethanes of Reduced Flammability
672
95
Microstructure of Products of Isoprene Polymerization on Titanium–Magnesium Catalysts: an NMR Study
682
96
Self-Healing Paint and Varnish Polymer Coatings
689
97
Control of the Sorption Properties and Wettability of a Nonwoven Polypropylene Material by Direct Gas Fluorination
701
98
Properties of Mixed Aqueous Solutions of Polyethylene Oxide and Carboxymethyl Cellulose with Different Degrees of Ionization and of Composite Films Prepared from Them
707
99
Synthesis and Use of Hydrogenated Polymers
715
100
Synthesis of Sodium Borohydride Dihydrate and Specific Features of Its Thermolysis
734
101
Use of Chelate Complexes of Lead(II) in Low-Temperature Technologies of Ceramic Piezoelectric Materials
743
102
Synthesis of Polydisperse Boron Carbide and Synthesis of a Ceramic on Its Basis
750
103
Modification of Natural Rubber with Poly(diallyldimethylammonium chloride) and Polyvinyl Chloride
759
104
Degradation of Polylactide—Polyethylene Binary Blends in Soil
767
105
Controlled Synthesis of Methacrylic Acid-Methyl Acrylate Copolymers and Their Properties at Various Interfaces
775
106
Specific Features of Thermochemically Initiated Radical Copolymerization of Mixtures of Methacrylic Monomers in the Presence of Dissolved Polyvinyl Butyral
787
107
Synthesis of Polypropylene in the Liquid Monomer in the Presence of a Titanium—Magnesium Catalyst: Effect of Various Internal Donors
796
108
Preparation and Application of Chemically Bonded Silica Supported Calix[4]arene as Reinforced Filler in NR/BR Blend Based Rubber Compounds
809
109
The Synthesis and Investigation of Liquid-Liquid Extraction Capability of N-Diphenylphosphino-N-ethylaniline and Its Chalcogenide Derivatives
817
110
Use of Sodium Borohydride in Electrodeposition of Nickel-Boron Coatings
823
111
Effect of Organic Additives on Properties of Electrodeposited CdSe Photoanodes
829
112
Electrodeposition of Cu-Sn Alloy from Oxalic Acid Electrolyte in the Presence of Amine-containing Surfactants
835
113
Preparation and Properties of Chemically Bonded Ceramic Coatings Reinforced by GO-TiO2 composites
842
114
Synthesis and Acidizing Corrosion Inhibition Performance of N-Doped Carbon Quantum Dots
848
115
Acid Catalysts Based on Mesoporous Aromatic Frameworks in Aldol Condensation of Furfural with Some Carbonyl Compounds
857
116
Extraction of Mercaptans from Light Hydrocarbon Mixtures with Aqueous Ammonia
865
117
Formation of Wear- and Corrosion-Resistant Ceramic Coatings by Combined Technologies of Spraying and Micro-Arc Oxidation
875
118
Effect of a Thermal-Vacuum Treatment and X-Ray Radiation on the Morphology and Electrical Properties of Titanium Oxide Nanocoatings
883
119
Precipitation of Nanocrystalline Silver Sulfide from Aqueous Solutions Containing a Stabilizer
893
120
Thermal Properties of Na2O-MgO-TiO2-Al2O3-B2O3-SiO2 Glasses and Prospects for Their Use for Sealing Solid Oxide Fuel Cells
902
121
Tribological Performance of Chemically Bonded Phosphate Ceramic Coatings with Different Curing Agents on Mild Steel
909
122
Conversion of Oxygenates to Aromatic Hydrocarbons on a Commercial Zeolite Catalyst: Comparison of Ethanol and Dimethyl Ether
918
123
Isomerization of 1-Butene to 2-Butenes in the Presence of Acid-Base Catalysts
924
124
Ethylene to Propylene over Zeolite ZSM-5: Improved Catalyst Performance by Treatment with CuO
933
125
An X-ray Photoelectron Spectroscopic Study of the Poly-N-vinylpyrrolidone Desorption from the Surface of a Granulated Carbon Sorbent
940
126
Preparation of Poly(methyl methacrylate) Nanoparticles 15–50 nm in Diameter from Submicrometer-Sized Latex Particles
946
127
Dissipative Properties of Polymer Films and Composite Materials Based on Polyvinyl Acetate
952
128
Gas-Liquid Fluorination of 1,1,1,2-Tetrafluoroethane and Methane with Elemental Fluorine in a Perfluorinated Liquid
958
129
Microalgal Biomass as a Raw Material for Producing Surfactants
964
130
Controllable Preparation and Application of Quercetin Molecularly Imprinted Polymer
972
131
Performance Evaluation on a Modified β-Cyclodextrin Crosslinking Acid System
982
132
Electrochemical Behavior of a Hybrid Nanocomposite Based on Poly(3,6-di(3-aminophenyl)amino-2,5-dichloro-1,4-benzoquinone and Single-Walled Carbon Nanotubes on Graphite Foil in a Lithium Aprotic Electrolyte
996
133
Effect of Electrode Material on Electrodeposition of Tungsten Oxide
1006
134
Study of Structural Changes in LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium-Ion Batteries by X-Ray Diffraction Analysis in the In Situ Mode
1013
135
Conversion of Products Formed in Gasification of Organic Fuels in a Flow-Through Filtration Converter with Packing
1020
136
Mathematical Modeling of Aluminum Diboride Combustion in an Air Flow
1030
137
Reagent Pretreatment of Polychlorobiphenyls prior to Breakdown
1039
138
Heat-Stable Salts and Methods for Their Removal from Alkanolamine Carbon Dioxide Absorbents (Review)
1045
139
Mathematical Simulation of the Alkaline Demercaptanization of Hydrocarbon Raw Materials
1064
140
Use of Nitrogenous Bases as Promoters of the Reaction of Ethylene Carboalkoxylation on a Cobalt Catalyst
1069
141
Study of the Influence Exerted by Addition of Coker Gas Oil to Straight-Run Gas Oil on the Process of Hydrotreating in the Presence of CoMo/Al2O3 Catalyst
1077
142
Zr- and La-containing Catalysts in Synthesis of Methanol and Dimethyl Ether
1084
143
Ethylene to Propylene Conversion over Ni-W/ZSM-5 Catalyst
1094
144
Specific Features of Dissolution of Metallic Rhodium in Acid Oxidative Media under Hydrothermal Conditions
1102
145
Extraction of Iron(III) from Chloride Nickel Solutions with Aliphatic Ketones
1107
146
Study of the Possibility of Purifying Lithium Chloride Solution to Remove Impurities by Sorption Method
1113
147
Comparative Evaluation of the Sorption Activity of Carbon Sorbents with Respect to Deltamethrin and Invermectin Pesticides
1122
148
Properties of Polytetrafluoroethylene Films Modified with Titanium and Phosphorus Oxide Structures
1128
149
Flocculating and Hydrodynamic Properties of Aqueous-Salt Solutions of Acrylamide Polymers
1135
150
Hydrogenation of Indene–Coumarone Resin on Palladium Catalysts for Use in Polymer Adhesives
1143
151
Synthesis of Aromatic Polyphenylquinazolones
1153
152
Mechanochemical Method for Peat Carboxymethylation
1158
153
Synthesis and Antimicrobial Activity of Norbornene-Containing Mannich Bases
1161
154
Ruthenium Catalysts on ZSM-5/MCM-41 Micro-Mesoporous Support for Hydrodeoxygenation of Guaiacol in the Presence of Water
1170
155
Hydrogenated Styrene–Diene Copolymers as Thickening Additives to Lubricating Oils
1179
156
Enhancement of the Heat Resistance of Polymers and Composites by Curing of Epoxy Resins with Methylendic Anhydride under the Action of Imidazoles
1190
157
Kinetics of Butadiene Polymerization in the Presence of the TiCl4-Al(i-C4H9)3 Catalytic System Physically Modified in Turbulent Flows: Results of Computational Experiments
1200
158
Radiation-Stimulated Oxidation of Naturally Aged Polyethylene Films
1210
159
Synthesis of Photosensitive Cyclopropane-Containing Polymers
1215
160
Radical-Initiated (Co)polymerization of Methacrylates in the Presence of Organometallic Iron Complexes
1223
161
Dependence of Properties of High Voltage Zinc Oxide Varistor from Antimony and Nickel Oxides
1232
162
Isolation of Chloride Sodium from Concentrated Wastewater in Chemical Productions
1239
163
Formation and Cathodic Reduction of Taurine Complexes with Zinc and Cobalt(II)
1244
164
Sulfated Halloysite Nanoscrolls as Superacid Catalysts for Oligomerization of Hexene-1
1251
165
Pyrolysis of Methane on a Resistive ZrO2/SiC Catalyst
1258
166
Activation of Carbon Nanofibers and Their Application as Electrode Materials for Supercapacitors
1266
167
Effect of Composition and Thickness of Organosilicate Coatings on the Arc Welding Process
1274
168
Theoretical Analysis of the Composition and Thermodynamic Parameters of Products Formed in Combustion of 2,2'-Bis(bicyclo[2.2.1]heptane) in Oxygen
1284
169
A Deep Analytical Study in the Oxidation Polymerization Desulfurization Process Using a Keggin-Type Polyoxometalate Catalyst: Characterization of Solid and Liquid Products
1291
170
Hydro-Oxygenation of Furfural in the Presence of Ruthenium Catalysts Based on Al-HMS Mesoporous Support
1306
171
The Role of Gold Nanoparticles on Different Supports for the In-Air Conversion of Levulinic Acid into γ-Valerolactone with Formic Acid as an Alternative Hydrogen Source
1316
172
Magnesium-Bismuth System: Thermodynamic Properties and Prospects for Use in Magnesium-Ion Batteries
1325
173
Water-Soluble Polymeric Heteroligand Europium Complexes
1336
174
Microheterogeneous Polyetherhydroxylurethane Elastomers with Controlled Phase Structure for Structural Adhesives
1342
175
Study of Transport Properties and Microstructure of Lithium-Conducting Li0.33La0.56TiO3 Ceramic
1351
176
Effect of Target Erosion on Properties of Molybdenum Films
1359
177
Influence of Powdered Cellulose and Charge Preparation Procedure on the Phase Composition and Characteristics of the Iron-Potassium Oxide Material
1366
178
Production of Biodiesel Fuel by Transesterification of Triglycerides in the Presence of Sodium Pyrophosphate
1377
179
Catalytic Cracking of a Mixture of Vacuum Gas Oil and Vegetable Oil in the Presence of Mixed Mg–Al Oxide of Various Compositions
1383
180
Influence of the Pore Structure of a Catalyst for Demetallization of Petroleum Feedstock on the Process Results
1392
181
Intensification of Mass Transfer Processes with the Chemical Reaction in Multi-Phase Systems Using the Resonance Pulsating Mixing
1399
182
Physicochemical and Sorption Properties of Natural Coal Samples with Various Degrees of Metamorphism
1410
183
Influence Exerted by Cross-Linking Effect on Properties of Sorbents Produced from Aspen and Larch Bark
1422
184
Silicon-containing Solution for Passivation of Zinc Coatings
1432
185
Effect of Additions of Electrochemically Oxidized Graphite on the Physicochemical and Mechanical Properties of Modified Epoxy Composites
1439
186
Synthesis and Performance Evaluation of Temperature-controlled Viscous Acid
1447
187
Effect of Tin Dioxide Modified F-TiO2/SiO2 Nano-Powder Catalysts on Photocatalytic Degradation of Acrylonitrile
1458
188
Thermocatalytic Biomass Processing
1465
189
Hydrothermal Liquefaction of Arthrospira platensis for Bio-Oil Production and Study of Chemical Composition for Bio-Oil and Its Gasoline Fraction
1480
190
Preparation of Nonwoven Materials for Removal of Oil Spills from Water by Electrospinning of Polylactide Melt
1487
191
Electret and Strength Properties of Polymeric Materials Based on Epoxy Oligomer and Amine Curing Agents
1492
192
New Anion Exchanger Based on Polyvinyl Chloride and Its Application in Industrial Water Treatment
1499
193
Thermomechanical Analysis of Composite Films Based on Chitosan and Chitin Nanofibrils
1506
194
Production of Modified Starch Using System Hydrogen Peroxide-Thiourea Dioxide
1513
195
An Effect of Nickel Additives on Anode Behavior of Zinc-Aluminum Alloys Zn5Al, Zn55Al in NaCl Electrolyte
1517
196
Acid Decomposition of p-tert-Butylcumene Hydroperoxide to p-tert-Butylphenol and Acetone
1524
197
Synthesis of an Extractant Based on Neodecanoic Acid for Rare Earth Metal Preconcentration and Separation
1531
198
Optimization of the Pyrolysis of Naphtha Fractions of the West Siberian Gas Condensate to Obtain Lower Olefins and Divinyl
1537
199
Production of Ethylene from Ethane Fraction by a Method Alternative to Steam Cracking
1549
200
Kinetics of Thermal Decomposition of Solid Propellant Based on Aluminum and Ammonium Perchlorate
1558
201
An Effect of the Nature of Immobilized Components on the Adsorption and Mass Transfer Properties of Ultrafiltration Membranes Based on Sulfonate-containing Сopolyamide
1570
202
Sorption of Lanthanum(III) and Neodymium(III) from Concentrated Phosphoric Acid by Strongly Acidic Cation Exchange Resin (SQS-6)
1581
203
High-Selectivity Pervaporation Membranes for 1-Butanol Removal from Wastewater
1593
204
Green Tribology: Orientation Properties of Diamond-Like Carbon Coatings of Friction Units in Lubricating Media
1603
205
Rare and Valuable Metals in Oils and Coals of the Russian Federation: Content and Methods of Extraction
1616
206
Role of Solvent Deasphalting in the Modern Oil Refining Practice and Trends in the Process Development
1634
207
Influence of the MgO Additive on the Properties of Bioactive Calcium-Phosphate Thin Films
1649
208
Lithium-conducting Solid Electrolytes Synthesized by the Sol-Gel Method in the System Li7La3Zr2O12-Li5La3Nb2O12
1657
209
Influence of Type of Organic Template on the Properties of Zeolites ZSM-23
1664
210
Thermal Transformation of the Surface of Mn-, W-Containing Plasma Electrolytic Oxide Coatings on Titanium
1674
211
Thermal Decomposition of Enegy Composite Material with an Inert Binder
1680
212
Influence of the Elemental Composition, Density, and Enthalpy of Formation of Solid Fuel Dispersants on the Range of an Atmospheric Aircraft
1690
213
Kinetic Fundamental Aspects of Heat Release in Thermal Decomposition of 7-Amino-7H-difurazano[3,4-b:3′4′-f] furoxano[3″4″-d]azepine and Binary Fuel on Its Basis
1696
214
Water-Soluble Metal—Polymer Gallium Complexes Based on Imino Derivatives of an N-Vinylpyrrolidone/N-Vinylamine Copolymer
1705
215
Composites Based on Polystyrene and Asphaltenes
1712
216
Polymer Coatings Containing Core-Shell Pigments with Polyaniline Shell
1718
217
Effect of Hydrogen and Carbon Monoxide Additions on Partial Oxidation of Methane at Elevated Pressures
1726
218
Azo Derivatives of Pyrocatechol, Resorcinol, and Salicylic Acid as Collectors for Sulfide Ore Flotation
1734
219
Oxidative Cracking of Oil Refinery Gases
1745
220
Rheological, Structural, and Strength Characteristics of Cold-Cured Polyurethane Synthesized in the Presence of the Complex of Tributyl Phosphate with Zinc Dichloride
1751
221
Influence of Oxygen-Containing Compounds on Conversion and Selectivity of Dibenzotiophene and Naphthaline on Bulk and Supplied Co(Ni)MoS2 Catalysts
1761
222
Isomerization of Linear Paraffin Hydrocarbons in the Presence of Sulfide CoMo and NiW Catalysts on Al2O3—SAPO-11 Support
1772
223
Effect of Carbon Component Characteristics on Texture and Electrochemical Properties of Polyaniline—Carbon Composites
1780
224
Inhibiting Effect of Quinoline on the Hydroconversion of Dibenzothiophene and Naphthalene on Trimetallic NiCoMoS Catalysts Supported on Al2O3, SiO2, and SBA-15
1789
225
Co-Processing of Straight Run Gas Oil-Rapeseed Oil Mixture Using Sulfide NiMo Catalyst on Zeolite-Containing Support
1797
226
Colloidal Stability of Greases Based on Oils with Organic Thickening Agents
1805
227
Aspects of Interaction of Surfactant—Acid Compositions at Phase Boundary with Hydrocarbons
1810
228
Calculation of Dimensions of a Three-Phase Reactor for Fisher—Tropsh Synthesis
1820
229
Membrane Absorption of Ethylene from a Mixture with Ethane Using MDK-3 Composite Membranes
1826

№
стр.
1
Erratum to: “Microstructural Study of Nylon-6/Gelatin Composite Nanofibers”
0
2
Erratum to: “Synthesis and study of Ru–Ba–Cs/Sibunit ternary catalysts for ammonia synthesis”
0
3
Erratum to: “Fractionation of Wood with Binary Solvent 1-Butyl- 3-methylimidazolium Acetate + Dimethyl Sulfoxide”
0
4
Erratum to: Effect of High-Temperature Gas-Chemical Modification on the Structural and Functional Properties of Carbon Black Particles
0
5
Erratum to: Removal of Some Radionuclides Using Stannic Silicovanadate as Inorganic Ion Exchanger
0
6
Deposition and Study of Composite Coatings with Oxygen-containing Manganese Compounds on the Surface of D16 Aluminum Alloy
1
7
TeO2–(NaPO3)6 Glass-Forming System
9
8
Synthesis by the Molecular Layering Method and Functional Properties of Metal-Oxide Nanocoatings on the Surface of Quartz Optical Fibers
12
9
Thermal Transformations of Polyoxadiazoles
23
10
Investigation of Phase Transformations in the Synthesis of Catalytic Coatings on Metal Substrate
31
11
ZnO Nanoparticle Functionalization by Organosilanes Catalyzed with Ethylene Diamine for Production of Stable Nanodispersions in Water
40
12
Supported Polyoxometalate Catalysts for Oxidation Processes
49
13
Synthesis of Li-ion Battery Cathode Materials Based on Lithiated Transition Metal Oxides by Spray Method
53
14
Development and Study of Gas-Diffusion Cathodes in Cylindrical Cells of Air-Aluminum Electrochemical Generator
58
15
Cycling Performance at Li7La3Zr2O12|Li Interface
63
16
Electroflotation Recovery of Poorly Soluble Lanthanum Compounds from Highly Concentrated Salt Systems
70
17
Synthesis of Hydrophobic Aerogel Heat Insulation Materials Based on Polyvinyl Alcohol/Carbon Black Composite
78
18
Physicochemical Properties of Aqueous Solutions of Binary Mixtures of Lignin Derivatives and Sodium Dodecyl Sulfate
82
19
Role of Pectin Substances in the Structural Organization of the Flax Fiber–Montmorillonite Hybrid Sorbent
90
20
Effect of Mineral Fillers on the Heat Resistance and Combustibility of an Intumescent Fireproofing Formulation on Silicone Base
96
21
Relationship between the Morphology, Nanostructure, and Strength Properties of Aquivion® Type Perfluorinated Proton-Conducting Membranes Prepared by Casting from Solution
101
22
Preparation of Porous Polymer Networks of N-Vinylpyrrolidone with Triethylene Glycol Dimethacrylate and Determination of Their Specific Surface Area Using Rose Bengal Dye
105
23
Synthesis of D,L-Lactide–ε-Caprolactone Copolymers and Preparation of Films Based on Them
113
24
Synthesis and Properties of Organo-Inorganic Composites Based on Daunomycin, Polyvinylpyrrolidone, and Selenium Nanoparticles
121
25
In situ Polymerization Technique for Obtaining Composite Materials Based on Polyethylene, Multi-walled Carbon Nanotubes and Cobalt Nanoparticles
127
26
Effect of Cu Doping on the SCR Activity of Mn‒Ce/ATP Catalyst
136
27
Effect of ZnO on Photocatalytic Degradation of Rh B and Its Inhibition Activity for C. coli Bacteria
143
28
Hierarchically Structured Porous SnO2/TiO2 Materials with Design Controllable Phases and Enhanced Photocatalytic Activity
150
29
Magnetic Fe3O4/SiO2/NH2 As the Recyclable Heterogeneous Nanocatalyst on Bisphenol-A Recovery from Polycarbonate Wastes
159
30
Synthesis of Tungsten Phosphate Glasses and Study of Their Thermal Properties
167
31
Consolidation by Spark Plasma Sintering of a Ceramic Material Based on Silicon Carbide with Good Physicomechanical Properties, Mechanochemically Activated with Boron
173
32
Production of Granulated NaP Zeolite without Binder
180
33
Electrolytic Double-Layer Supercapacitors Based on Sodium-Ion Systems, with Activated-Carbon Electrodes
187
34
Formation and Properties of a Support Made of Solid Solutions Based on Zirconium Oxide for Single Tubular Solid-Oxide Fuel Cells
196
35
Formation of Multiwall Carbon Nanotubes on Cylindrical Substrates in Synthesis by Metal-Organic Chemical Vapor Deposition
202
36
Sonochemical Electrodeposition of Copper Coatings
207
37
Effect of Aerosol-Assisted Chemical Vapor Deposition Parameters on Characteristics of the Resulting Carbon-containing Particles
214
38
Effect of Industrial Detonation Nanodiamonds on the Ratio of Mononitrotoluene Isomers in Nitration of Toluene with a Sulfuric-Nitric Acid Mixture
220
39
Effect of Armoring Composition on the Yield of Nanodiamonds and Content of Impurities
225
40
Composition of Inorganic Components of Oat Husks and Products of Their Chemical and Enzymatic Transformation
230
41
Sequential Dehydration and Oxidation of Biodiesel-derived Crude Glycerol into Acrylic Acid
235
42
Corrosion Inhibition of Mild Steel in Acidic Solutions Using 1,2,4-Triazolo[1,5-a]pyrimidine
245
43
Effective Removal of Nitrotoluene Compounds from Aqueous Solution Using Magnetic-Activated Carbon Nanocomposites (m-Fe3O4@ACCs)
253
44
Influence of Surfactants on the Microstructure and Performance of PDMS-E Grafted Gelatin Films
264
45
Effect of Support of СоМоS Catalysts on Hydrodeoxygenation of Guaiacol as a Model Compound of Biopetroleum
270
46
Electrode Materials Based on Porous Silicon with Platinum Nanoparticles for Chemical Current Sources
280
47
Hydrothermal Synthesis of Ti-Doped Nickel Hydrosilicates of Various Morphologies
286
48
Thiocarbamoylation of Chlorosulfonated Polystyrene for Preparing Sorbents for Noble Metal Ions
292
49
Influence of the Degree of Chitosan Sulfoethylation on the Sorption of Palladium(II) Chloride Complexes from Multicomponent Solutions
297
50
Synthesis of 2-Chloromethyl-1-(p-vinylphenyl)cyclopropane and Its Copolymerization with Styrene
304
51
Metal-Containing Nanocomposites Based on 1-Vinyl-1,2,4-triazole–Crotonic Acid Copolymer
310
52
Tetrablock Copolymers Based on Oligoether Diols, 2,4-toluene diisocyanate, Isophorone Diisocyanate, and Methylene-bis-о-chloroaniline
314
53
Coagulation of Natural Rubber and Polyvinyl Chloride Latices
320
54
Use of Specific Properties of Poly-N-vinylcaprolactam in Immunochemical Reactions
325
55
Synthesis of a Carbon-Containing Composite Based on Aspen Wood and Its Structural and Electrochemical Properties
330
56
Investigation of Joint Cathodic Electrodeposition of Two Metals in the Course of the Formation of Paint-and-Varnish Coatings
337
57
Synthesis of 4-Vinylmorpholine Based on Acetylene
342
58
Molecular Layer Deposition and Thermal Transformations of Titanium(Aluminum)-Vanadium Hybrid Organic-Inorganic Films
347
59
Thermodynamic Analysis and Kinetics of Etching of Thin PbS Films in Hydrochloric Acid Solutions
360
60
Effect of Thermal Treatment on the Structure and Properties of Hydroxyapatite
368
61
Photochromic Properties of Porous Glass Modified with Molybdenum Oxide Groups
375
62
Production of a Concentrate of Rare-Earth Metals from Wet-Process Phosphoric Acid
379
63
Electrodeposition of Zinc–Nickel–CNT Composite Coatings in the Pulsed Mode
384
64
Electrical Conductivity of Films Formed by Few-Layer Graphene Structures
388
65
Functional Composites Based on Polylactide and Graphene
392
66
Structure and Electrocatalytic Properties of Copper-Containing Aniline–Melamine–Formaldehyde Polymer Composites
396
67
Pervaporation Properties of Film and Composite Membranes Based on an Interpolyelectrolyte Complex of Sulfonate-Containing Aromatic Copolyamide
404
68
Thermal and Thermo-Oxidative Destruction of Poly(Ethylene Terephthalate) Modified with Formulation Based on Polyfluorinated Alcohol
412
69
Composite Materials Based on Polylactide and Poly-3-hydroxybutyrate “Green” Polymers
417
70
Experimental and Simulation Research of Spatial Distribution of Carbonyl Groups in γ-Irradiated Polyethylene
424
71
Synthesis of Highly Dispersed Zirconium Carbide
428
72
Improvement of the Catalytic Oxidation of Dissolved Hydrogen with Palladium-Coated Sorbents
436
73
Luminescence Method for Studying the Formation and Stability of Macromolecular Complexes of Transition Metals with Carboxyl-Containing Polymers in Organic Solvents
440
74
Nanofibers of Semiconductor Oxides as Sensitive Materials for Detection of Gaseous Products Formed in Low-Temperature Pyrolysis of Polyvinyl Chloride
447
75
Surface-Modified CdS/ZnO Material: Single-Reactor Synthesis and Mechanism of Formation in Aqueous Solution
454
76
Preparation and Properties of Frost-Resistant Room-Temperature-Curable Compounds Based on Oligoethertetraurethane Diepoxides of Various Chemical Structures
463
77
Synthesis of Immunoactive Tris(2-hydroxyethyl)ammonium 1-R-Indol-3-ylsulfanyl(sulfonyl)acetates
469
78
Anion-Radical Salts of 7,7,8,8-Tetracyanoquinodimethane (TCNQ) with Cations Based on Amino-Chloropyridines
473
79
Evaluation of the Lyophilicity of Activated Carbons for Supercapacitors
477
80
Synthesis and Sorption Performance of Novel Sorbents for Selective Solid-Phase Extraction of Eu(III) Ions from Aqueous Solutions
483
81
Study of Synthesis and Corrosion Inhibition of Novel Mannich and Schiff Bases on Carbon Steel in Acid Solution
499
82
Electrodeposition Mechanism of Zn‒Ni‒Mn Alloy at Different Time Intervals
510
83
Composites of Reduced Flammability Based on Amorphous Elastic Polyurethane and Halogen-containing Flame Retardant
520
84
Metal-Organic Frameworks as Sorbents for Purification of Vegetable Oils
524
85
Oxidative Desulfurization of Hydrocarbon Feedstock
529
86
Study of the Microarc Oxidation of Aluminum Modified with Silicon Carbide Particles
543
87
Autoclave Processing of Concentrates Containing Stable Form of Palladium Oxide
550
88