Examples



mdbootstrap.com



 
Article
2018

Mechanism of the Enhanced Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2 Cathode Materials by a Pre-Sintering Process


Liyuan HanLiyuan Han, Caiyin YouCaiyin You, Qin WangQin Wang, Shaohua GuoShaohua Guo, Ke XuKe Xu, Weihua ZhangWeihua Zhang, Rong YangRong Yang
Russian Journal of Electrochemistry
https://doi.org/10.1134/S1023193518010044
Abstract / Full Text

α-NaFeO2 layered LiNi1/3Co1/3Mn1/3O2 cathode materials were synthesized by mechanical milling accompanied by the solid phase sintering. The sample exhibited a good crystallinity and layered structure while sintered at 900°C, which can be further improved by adding a pre-sintering process at 500°C before high temperature sintering. The sample with a pre-sintering process presents an average particle size about 0.6 μm, and a hexagonal crystalline structure. The optimally fabricated sample showed a first charge capacity of 210.2 mA h/g, discharge capacity of 171.2 mA h/g with a current rate of 0.2 C within the voltage range of 2.7~4.5 V. With increasing the current rate to 1 C, the charge–discharge capacity faded quickly during the cycling process, which can be partially recovered while operated at a low current rate. However, the capacity fading at a current rate of 2 C was largely irreversible. The evolution of the surface chemical states was evaluated using X-ray photoelectron spectroscopy on the charged and discharged samples to understand the high rate capacity fading.

Author information
  • School of Materials Science and Engineering, Xi’an University of Technology, Xi’an, 710048, P. R. ChinaLiyuan Han, Caiyin You, Qin Wang, Shaohua Guo, Ke Xu, Weihua Zhang & Rong Yang
References
  1. Zhang, L.L., Ma, Y.L., Cheng, X.Q., Zuo, P.J., Cui, Y.Z., Guan, T., Du, C.Y., Gao, Y.Z., and Yin, G.P., Enhancement of high voltage cycling performance and thermal stability of LiNi1/3Co1/3Mn1/3O2 cathode by use of boron-based additives, Solid State Ionics, 2014, vol. 263, p.146.
  2. Fang, X., Ge, M.Y., Rong, J.P., and Zhou, C.W., Freestanding LiNi0.5Mn1.5O4/carbon nanofiber network film as lightweight and high-power cathode for lithium ion batteries, Acs Nano, 2014, vol. 8, p. 4876.
  3. He, J.R., Chen, Y.F., Li, P.J., Wang, Z.G., Qi, F., and Liu, J.B., Synthesis and electrochemical properties of graphene-modified LiCo1/3Ni1/3Mn1/3O2 cathodes for lithium ion batteries, RSC Advances, 2014, vol. 4, p. 2568.
  4. Ohzuku, T. and Makimura, Y., Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries, Chem. Lett., 2001, vol. 7, p.642.
  5. Yabuuchi, N. and Ohzuku, T., Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithiumion batteries, J. Power Sources, 2003, vol. 119–121, p.171.
  6. Yang, C.C., Lian, Z.Y., Lin, S.J., Shih, J.Y., and Chen, W.H., Preparation and application of PVDF-HFP composite polymer electrolytes in LiNi0.5Co0.2Mn0.3O2 lithium—polymer batteries, Electrochim. Acta, 2014, vol. 134, p.258.
  7. Kim, J.W., Travis, J.J., Hu, E.Y., Nam, K.W., Kim, S.C., Kang, S.S., Woo, J.H., Yang, X.Q., George, S.M., Oh, K.H., Cho, S.J., and Lee, S.H., Unexpected high power performance of atomic layer deposition coated Li[Ni1/3Mn1/3Co1/3]O2 cathodes, J. Power Sources, 2014, vol. 254, p.190.
  8. Han, Y.M., Zhang, Z.F., Zhang, L.B., Peng, J.H., Fu,M.B., Srinivasakannan, C., and Du, J., Influence of carbon coating prepared by microwave pyrolysis on properties of LiNi1/3Co1/3Mn1/3O2, Trans. Nonferrous Met. Soc. China, 2013, vol. 23, p. 2971.
  9. Shi, S.J., Lou, Z.R., Xia, T.F., Wang, X.L., Gu, C.D., and Tu, J.P., Hollow Li1.2Mn0.5Co0.25Ni0.05O2 microcube prepared by binary template as a cathode material for lithium ion batteries, J. Power Sources, 2014, vol. 257, p.198.
  10. Ohzuku, T., Ueda, A., and Nagayama, M., ChemInform abstract: Electrochemistry and structural chemistry of LiNiO2 (R3m) for 4 volt secondary lithium cells, J. Electrochem. Soc., 1993, vol. 140, p. 1862.
  11. Yang, X.Q., Sun, X., and McBreen, J., New phases and phase transitions observed in Li1–xCoO2 during charge: in situ synchrotron X-ray diffraction studies, Electrochem. Commun., 2000, vol. 2, p.100.
  12. Yang, X.Q., McBreen, J., Yoon, W.S., and Grey, C.P., Crystal structure changes of LiMn0.5Ni0.5O2 cathode materials during charge and discharge studied by synchrotron based in situ XRD, Electrochem. Commun., 2002, vol. 4, p.649.
  13. Lin, F., Markus, I.M., Nordlund, D., Weng, T.C., Asta, M.D., Xin, H.L., and Doeff, M.M., Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries, Nat. Comm., 2014, vol. 5, p. 3529.
  14. Hashema, A.M.A., Abdel-Ghanya, A.E., Eida, A.E., Trottier, J., Zaghibb, K., Maugerc, A., and Julien, C.M., Study of the surface modification of LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion battery, J. Power Sources, 2011, vol. 196, p. 8632.
  15. Wang Q., Tian N., Xu K., Han L., Zhang J., Zhang W., Gu, Sh., and You, C., A facile method of improving the high rate cycling performance of LiNi1/3Co1/3Mn1/3O2 cathode material, J. Alloy. Comp., 2016, vol. 686, p.267.
  16. Shaju, K.M., Rao, G.V.S., and Chowdari, B.V.R., Performance of layered LiNi1/3Co1/3Mn1/3O2 as cathode for Li-ion batteries, Electrochim. Acta, 2002, vol. 48, p.145.
  17. Ghosh, P., Mahanty, S., and Basu, R.N., Effect of silver addition on the properties of combustion synthesized nanocrystalline LiCoO2, Mater. Chem. Phys., 2008, vol. 110, p.406.
  18. Rao, C.V., Reddy, A.L.M., Ishikawa, Y., and Ajayan, P.M., LiNi1/3Co1/3Mn1/3O2–Graphene composite as a promising cathode for lithium-ion batteries, ACS Appl. Mater. Interfaces, 2011, vol. 3, p. 2966.
  19. Yabuuchi, N., Yoshii, K., Myung, S.T., Nakai, I., and Komaba, S., Detailed studies of a high-capacity electrode material for rechargeable battereis, Li2MnO3–LiCo1/3Ni1/3Mn1/3O2, J. Am. Chem. Soc., 2011, vol. 133, p. 4404.
  20. Ohzuku, T., Ueda, A., Nagayama, M., Iwakoshi, Y., and Komori, H., Comparative study of LiCoO2, LiNiCoO2, and LiNiO2 for 4 volt secondary lithium cells, Electrochim. Acta, 1953, vol. 38, p. 1159.